Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
“ Factory Reservations have approximate size & centering. *** Requires the use of Mac Adapter UNIMAC-82D -17 - Trouble Shooting If trouble occurs in the display unit, perform the following checks and take the indicated action; if the trouble persists, please consult with your dealer. Symptom Check Action nun — There is no display please use upper case for example power cord/plug, power switch signal cable The power saving function might have acted (if so the pilot LED will be yellow). Plug the power cord into the outlet correctly. Press the power switch. Connect the signal cable correctly. Release the power saving function by operating the mouse or keyboard. For additional details please read the Operation Manual of the hardware you are using. [hO The image is too large or too small, or it is displaced from it» correct position The mode is not registered. Perform the desired settings and then save them by waiting 20 seconds or pressing the (T) "Exit" key. D <* u T 0 isplay cole Exemple T neven or o io image till is larg I*— OLfiia«mM >r is abnormal, he color is ff-color, distortion and/ e.) Is there something that produces a magnetic field neartjy? (Examples Television monitor, another computer display unit, speaker, etc.; was the orientation of the monitor perhaps changed while it was in use?) Remove the source of the magnetic field. Turn off the power, and turn it on again after 30 minutes. Make sura your cable is correct. Connect the signal connector correctly. Try a different orientation. C & tc TT haracters sen eieart) >o dark. ■ ;! i _ »* 1 Is the image signal level correctly adjusted? Is the brightness or contrast adjustment turned all the way down? Check the video signal level from the computer and adjust it in the correct direction. Adjust the brightness and contrast. The dtsptay appears but (tiers is no sound. AUDIO cattfe Volume Volume mute Computer sound level Connect the AUDIO cable correctly. Set the volume to its minimum, or mute the volume. Is the sound level from the computer restricted? Please refer to the operation manual for the hardware you are using for the details. The sound is not correct. AUDIO cable Computer sound level Connect the AUDIO caUe correctly. Is the sound level from the computer restricted? Please refer to tho operation manual for the hardware you are using for the details. The built-in microphone does not operate. Microphone cable Audio input level Connect the microphone cable correctly. Speak into the built-in microphone in a normal voice from a distance of 30cm to 50cm. The external headphones do not operate. Headphone jack Connect the headphone jack correctly. Check that the headphone jack is stereo type only. The external microphone does not operate. Microphone jack Microphone cable Connect the microphone jack conectty. Check that the microphone jack is stereo type only. The screen size and position do not change. The front panel keys fail to operate. Is the input synchronization signal within the operating range? Are 2 or more buttons being operated at the same time? Check the video output mode from the computer, and select a mode within me display unit operating range. For details, please read the Operation Manual of the hardware you are using. Operate onty one button at a time. -18 - If Trouble Occurs For safety, please observe the following points. • When trouble occurs, turn the power OFF immediately and contact your dealer. If smoke comes out of this unit or a bad odor or strange noise comes out, continuing to use the unit can cause a fire or electrical shock. Turn the power OFF immediately, unplug the power cord from the outlet and contact your doaJor. • Absolutely do not remove the rear cover. There are high voltage parts inside, so touching them can cause an electrical shock. Leave inspection, adjustment and cleaning of the interior to your dealer. • Do not put anything inside the casing. II liquid or a foreign object should get inside accidentally, immediately turn the power OFF. unplug the power cord from the outlet and contact your dealer. Continuing to use the unit can cause a tire, electrical shock or breakdown of the unit. Technical Support if you have read this Operating Instructions and tried the troubleshooting procedures and are still having difficulty, please contact the dealer from whom the unit was purchased. You may also call the 1-800-PANASYS Technical Support telephone number which is operational 24 hours a day, 7 days a week. To contact the Technical Support Group call: 1-800-726-2797 (9:00 AM to 5:00 PM Eastern Time) To locate the Nearest Authorized Panasonic Service Center call: 1-800-447-4700 {24 Hours a day) To obtain Operating Instructions and Service Manuals call: 1-206-395-7343 {9:00 AM to 4:00 PM Pacific Time) To locate the Nearest Sales Dealer call: 1-800-742-8086 (24 Hours a day) Index (In alphabetical order) (page) Apple ( Apple computet )..................................5 ...