Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT]. 2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right. Page 32 CPF180i and CPF300i 3. Move the ShuttlePoint knob to highlight SHIP ICON and press [ENT] or move the ShuttlePoint knob to the right to show the popup window with ship icons. 4. Move the ShuttlePoint knob to select the desired icon and press [ENT] or move the ShuttlePoint knob to the right to select a new icon. 5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart page. 3.1.4 Changing the backlight and contrast With the CPF180i and CPF300i turned On, briefly press [PWR] to show the backlight and contrast popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD backlight intensity or up or down to change the LCD contrast. Press [ENT] to set. Figure 3.1.4 - Backlight and Contrast adjustment 3.1.5 Selecting North Up or Course Up The default selection is NORTH UP, however you may want the top of the Chart page oriented so it will always show the area ahead of the direction your vessel is travelling which is called COURSE UP. Figure 3.1.5 - Course Up/North Up menu 1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT]. 2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight COURSE UP/NORTH UP and press [ENT] or move the ShuttlePoint knob to the right. 4. Another popup window will be shown with NORTH UP and COURSE UP, move the ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint knob to the right. 5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart page. NOTE When the CPF180i and CPF300i are in COURSE UP mode a small arrow icon will be shown on the Chart page indicating the direction of North. CPF180i and CPF300i Page 33 3.2 AUTOMATIC TIME The time information supplied by the GPS satellites is in Universal Time Coordinates (UTC or Greenwich England Mean Time). To change the GPS Chart Plotter to read the correct time, first you must figure out the offset and if it is daylight savings time. For example on the West coast of the United States or Pacific Standard Time the offset needed would be –08:00 or –07:00 for daylight savings time, Eastern Standard Time –05:00 or –04:00 for daylight savings time. Figure 3.2 - Adjusting Time Figure 3.2a - Time Setup menu NOTE By setting up the time in the steps below, the time shown on the celestial page are automatically set up. 1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT]. 2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight TIME SETUP and press [ENT] or move the ShuttlePoint knob to the right. 4. Move the ShuttlePoint knob to highlight TIME ZONE and press [ENT] or move the ShuttlePoint knob to the right. 5. Look at the table and find the time zone for your area. Move the ShuttlePoint knob up or down to select the desired zone and press [ENT]. Page 34 CPF180i and CPF300i 6. Next move the ShuttlePoint knob to highlight DAYLIGHT SAVING and press [ENT] or move the ShuttlePoint knob to the right. 7. Daylight Saving menu has 3 options: 7.1 OFF Select Off when your location does not have Daylight Saving; 7.2 ON Select On to manually turn Daylight Saving On. This is the default selection; 7.3 AUTO When selected the Daylight time offset is automatically changed. 8. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 3.3 SELECTING LORAN TD OR OTHER COORDINATE SYSTEM The GPS Fix coordinates can be changed to show Latitude/Longitude, Loran TD’s or UTM. Below is the window that will appear when customizing the Coordinate System. Figure 3.3 - Coordinate System menu 1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT]. 2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight NAVIGATE and press [ENT] or move the ShuttlePoint knob to the right. 4. Move the ShuttlePoint knob to highlight COORDINATE SYSTEM and press [ENT] or move the ShuttlePoint knob to the right. 5. Move the ShuttlePoint knob to highlight the desired coordinate type and press [ENT] or move the ShuttlePoint knob to the right. 6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. NOTE If the TD is selected, you should set the Chain, Pair, ASF1, ASF2 and Alter. If the TD numbers are not correct the Pair letters may be backwards. Reversing the two letters usually solves this issue. Example Y/Z change to Z/Y. 3.4 CHANGING THE CHART COLOR The CPF180i and CPF300i have preprogrammed settings allowing you to customize the look of ...
Эта инструкция также подходит к моделям:Эхолоты - MAX CPF180I (5.8 mb)
Эхолоты - MAX CPF180I (5.8 mb)
Эхолоты - MAX CPF300I (5.8 mb)