Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
5. Ensure the Tractor is equipped with a functional ROPS and seat belt and require that the employee operator securely fasten the safety belt and operate with the ROPS in the raised position at all times. 6. Forbid the employee operator to carry additional riders on the Tractor or Implement. 7. Provide the required tools to maintain the Tractor and Implement in a good safe working condition and provide the necessary support devices to secure the equipment safely while performing repairs and service. 8. Require that the employee operator stop operation if bystanders or passersby come within 25 feet. Child Labor Under 16 Years of Age Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.) SAFETY © 2010 Alamo Group Inc. INTRODUCTION SECTION Introduction Section 2-1 INTRODUCTION 60C 01/10 Introduction Section 2-2 Alamo SMC C Series Backhoes are designed to provide years of outstanding service. C Series Backhoes are designed to fit on a wide range of compact and utility class tractors operating in a wide range of conditions. C Series backhoes should be mounted to a sub-frame. The purpose of this manual is to assist you with proper assembly, operation and maintenance of your new C Series Backhoe. Successful operation and long life of the backhoe depends on proper maintenance and care during operation. Please read and follow the instructions provided in this manual carefully. Additional instructions and information may be provided with your backhoe’s sub-frame or mounting kit or hydraulic kit. That information should be kept with this manual at all times. A front end loader or adequate front ballasting weight is required before operating or transporting a backhoe attachment. NOTE: This safety alert symbol identifies important safety messages in this manual. Observe and follow all safety messages to prevent personal injury. Reference to left-hand and right-hand used in this manual refers to position of operator when seated in the operating position of backhoe. If at any time you have a service problem with your backhoe or need new parts, contact your local dealer. Your dealer will need your backhoe model number and serial number to give you prompt efficient service. Parts orders must give complete description, correct part number, total amount required, model number, all necessary serial numbers, method of shipment and shipping addresss. INTRODUCTION © 2010 Alamo Group Inc. INTRODUCTION 60C 01/10 Introduction Section 2-3 SPECIFICATIONS Specifications may vary depending on tractor model, tire size and bucket used and are subject to change without notification. Tractor must be equipped with ROPS and seat belt that will provide greater safety and installation of backhoe subframe. GENERAL DATA A. Digging Depth (two foot flat bottom) ...............................................72.5” B. Reach from center line of Swing Pivot............................................101” C. Loading Height (bucket at 60°) .......................................................59” D. Swing Arc .......................................................................................150° E. Transport Height (maximum) ..........................................................65” F. Transport Overhang........................................................................40” G. Bucket Rotation ..............................................................................180° H. Stabilizer Spread, down position.....................................................76” I. Stabilizer Spread, up position .........................................................49” J. Backhoe Weight..............................................................................625 lbs. K. Shipping Weight (less bucket) ........................................................700 lbs. BUCKET DATA BUCKET WIDTH SAE STRUCK CAPACITY SAE HEAPED CAPACITY 9” 0.48 cu. ft. 0.54 cu. ft. 12” 1.65 cu. ft. 0.75 cu. ft. 16” 1.88 cu. ft. 1.03 cu. ft. CYLINDER DATA CYLINDER PISTON DIA. STROKE RETRACTED EXTENDED ROD DIA. LENGTH LENGTH Boom 2.5” 12.37” 20.44” 32.82” 1.375” Dipperstick 2.5” 12.01” 20.25” 32.26” 1.375” Bucket 2.25” 13.87” 21.25” 35.12 1.375” Swing 2.5” 8” 15.22” 23.22” 1.375” Stabilizer 2.25” 10.66” 17.44” 28.09” 1.375” INTRODUCTION © 2010 Alamo Group Inc. INTRODUCTION 60C 01/10 Introduction Section 2-4 INTRODUCTION © 2010 Alamo Group Inc. ASSEMBLY SECTION Assembly Section 3-1 ASSEMBLY 60C 01/10 Assembly Section 3-2 MOUNTING BACKHOE TO TRACTOR 1. Back tractor close enough to backhoe to connect hose kit or pump to tractor. WARNING: BEFORE leaving the Power Unit Seat, always engage the brake and set the Power Unit transmission in parking gear, disengage the auxiliary hydraulics, stop the engine, remove the key, and wait for all moving parts ...