Оценок - 5, средний балл: 4.4 ( )

Производитель: Louisville Tin and Stove Размер: 208.53 kb Название файла: Язык инструкции:

11/04 R NATURAL W251F, W351F, W501F L.P. W252F, W352F, W502F GAS W255F, W355F, W505F GAS W256F, W356F, W506F WARNING: Operation of this furnace when not connected to a properly installed and maintained venting system can result in Carbon Monoxide (C.O.) poisoning and possible death. For your safety, this furnace and the venting system should be inspected at least annually by a qualified service person. WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. -Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. -WHAT TO DO IF YOU SMELL GAS: ••••• Do not try to light any appliance. ••••• Do not touch any electrical switch; do not use any phone in your building. ••••• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. ••••• If you cannot reach your gas supplier, call the fire department. -INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER. This appliance is equipped with a blocked flue switch designed to protect against a blocked flue condition. The coating selected to provide longer life to the heat exchanger may smoke slightly upon initial firing. Please provide adequate ventilation if this occurs. This heater may be installed without recessing into stud space by using optional FSK (Free Standing Kit). This unit is not approved for installation in mobile homes, greenhouses, or environments involving dusty, wet, corrosive, or explosive conditions. Such conditions will invalidate the warranty and may create unsafe conditions. THIS UNIT IS NOT TO BE INSTALLED IN MOBILE HOMES. CONTENTS Introduction................................................ 2 Rear Register Kit Instructions.................................... 9 Specifications.............................................. 2 Lighting Instructions................................................... 10/11 Safety Rules................................................. 3 Pilot Adjustment........................................................... 12 Clearances.................................................... 3 Burner Flame Adjustment............................................ 12 Controls........................................................ 3 Maintenance Instructions........................................... 12 Combustion & Ventilation Air................... 4 WFF81 Fan Instructions.............................................. 13/14 Venting.......................................................... 5,6 Trouble Shooting Chart................................................ 15/16 Rough-In Instructions................................ 6 Parts Drawing................................................................ 17 Installation.................................................... 8 Parts List........................................................................ 18 Wiring Instructions..................................... 9 Warranty........................................................................ 20 READ CAREFULLY BEFORE INSTALLING UNIT These installation instructions are a general guide, and do not supersede applicable local codes and ordinances. Before planning or making the installation, be sure it complies with all phases of the local heating codes. Or, in the absence of local codes, with the latest edition of the National Fuel Gas Code, ANSI.Z223.1. In Canada, see the current installation code CAN1-B149. The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the latest edition of the National Electrical Code ANSI/NFPA No. 70. In Canada, see the current Canadian Electrical Code C5AC22.1. The ANSI standards are available from the American Gas Association, 1515 Wilson Blvd., Arlington, Virginia 22209. The NFPA standards are available from the National Fire Protection Association, Batterymarch Park, Quincy, MA. 02269. Canadian standards are available from International Approval Services,178 Rexdale Blvd.,Etobicoke,Ontario, Canada M9W 1R3. NOTE: If optional rear register kit is to be used, see supplemental installation instructions (No. 84504) and section marked “Special Instructions for Rear Register Kit Application” prior to installation of Rough-In. INTRODUCTION THIS IS A GAS-FIRED, GRAVITY VENTED WALL FURNACE THAT WILL OPERATE SAFELY AND PROVIDE AN EFFICIENT SOURCE OF HEAT WHEN INSTALLED, OPERATED AND MAINTAINED AS RECOMMENDED IN THESE INSTALLATION AND OPERATING INSTRUCTIONS. READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING, SERVICING, OR USING THE APPLIANCE. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, CONSULT LOCAL AUTHORITIES, OTHER QUALIFIED INSTALLERS, SERVICE AGENCIES, THE GAS SUPPLIER OR THE MANUFACTURER. SPECIFICATIONS Your vented wall furnace comes packed in a single carton. (For wall thermost...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: