Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Read all instructions before using this heater. 2. Read all information labels. Verify that the electrical supply wires are the same voltage as the heater. 3. All electrical work and materials must comply with the National Electric Code (NEC), the Occupational Safety and Health Act (OSHA), and all state and local codes. 4. The heater must be grounded to one of the grounding screws provided. 5. If you need to install a new circuit or need additional wiring information, consult a qualified electrician. 6. Protect electrical supply from kinks, sharp objects, oil, grease, hot surfaces or chemicals. 7. Do not place heater against paperboard or low-density cellulose fiberboard surfaces. 8. Do not place heater below an electrical convenience receptacle. 9. WARNING Overheating or fire may occur. Do not install the heater behind doors. 10. WARNING Fire or explosion may occur. Heater has hot and arcing or sparking parts inside. Do not install heater in any area where combustible vapors, gases, liquids, or excessive lint or dust are present. 11. WARNING Burn Hazard. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use extreme caution when any heater is used by or near children or invalids and whenever the heater is left operating unattended. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains away from heater. 12. WARNING Risk of electrical shock. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. 13. WARNING Risk of Fire. Do not block heater. To prevent a possible fire, do not block air intakes or exhaust in any manner. Heater must be kept clear of all obstructions: minimum of 12 inches in front and above, 6 inches on both sides. Heater must be kept clean of excessive lint, dirt and debris (See Maintenance Instructions). 14.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons. SAVE THESE INSTRUCTIONS Tel: 360-693-2505 P.O. Box 1675 Vancouver, WA 98668-1675 Installation Instructions Installation Instructions ABOUT THE CADET ELECTRIC BASEBOARD: The Cadet Electric Baseboard is designed to provide zonal heat to a room by using convection to naturally circulate warm air. Safety is Cadet’s first priority. All F-Series electric baseboards feature an oversized high temperature limit switch with a full length capillary sensor tube that temporarily shuts the heater off when excessive operating temperatures are detected. For effective and safe operation, and to prolong the life of the heater, read all instructions and safety information, and follow the maintenance instructions in this Owner’s Guide. BEFORE PROCEEDING WITH THE INSTALLATION INSTRUCTIONS, YOU MUST CONSIDER SEVERAL FACTORS THAT ARE CRITICAL TO INSTALLATION See our How-To Video at http://cadetco.com/installatio...
Эта инструкция также подходит к моделям:Электрообогреватели - 3F750 (222.71 kb)
Электрообогреватели - 3F750-8 (222.71 kb)
Электрообогреватели - 4F1000 (222.71 kb)
Электрообогреватели - 5F1250 (222.71 kb)