Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The temperature can be adjusted in a provide softer billowing steam during more of room temperature and time remaining are alter-range between 100 degrees and 125 degrees the steam bath. If the steam room temperature nately displayed every 5 seconds. The primary Fahrenheit with an initial default of 120 degrees. drops more than 5 degrees both elements will control can be mounted either inside or outside Once the set temperature is reached the ''soft automatically engage. SECTION 1B: STEAM GENERATOR OVERVIEW - CELSIUS AND 24 HOUR OPTIONS As an option your K60 control can be ordered with a Celsius and/or 24 hour timer in place of the Fahrenheit and 60 minute standard. The Celsius option's adjustable temperature range is between 38 degrees and 52 degrees Celsius, with an initial default of 49 degrees. The 24 hour timer option is adjustable in 1 hour increments from 1 to 24 hours. Other features of the K60 control should operate as described in section 2 below with the above noted exceptions. SECTION 2: OPERATION OF YOUR K60 CONTROL 1. Be sure the power circuit and water supply to 4. To change the time setting press and hold the from the prior setting to 125 degrees Fahrenheit. the generator are on. TIME button on the control. Continuing to hold At 125 degrees Fahrenheit the temperature set- the button will cause the time to increase in 5 ting will decrease in 1 degree increment to the 2. Press the ON/OFF button on the control until minute increments from the prior setting. At 60 lowest setting, 100 degrees Fahrenheit. the temperature is displayed. minutes the time setting will scroll backwards to 5 minutes. To shut down the generator press the 6. The TIME and TEMP set points are remem3. The generator should produce steam in 5 to 10 ON/OFF button. bered by the K60 for your next bath unless power minutes and will turn off automatically in 60 to the steam generator is lost. minutes or less depending on the set time. The 5. To change the preset temperature setting control will alternately display time remaining press and hold the TEMP button on the control. and the actual temperature at the sensor in your While continuing to hold the button, the tempera- steam room every 5 seconds. ture display will increase in 1 degree increments SECTION 3: TAKING A STEAMBATH 1. Wait for the steam room to reach a comfortable temperature. 2. Remove clothing and jewelry. 3. Enter the steam room and close the door to prevent steam from escaping. 4. Relax and enjoy the warm steam releasing tense muscles and refreshing the entire body. 5. If your steam room has a shower a pleasant experience can be achieved by taking a warm shower with the steam. 6. After a steambath a warm shower will give you a feeling of relaxation and is conducive to a good night’s rest. A cold shower will refresh you and is a good way to start a busy day or prepare you for an evening out. SECTION 4: MAINTENANCE OF YOUR AK STEAM GENERATOR The steam generator, steam head, fittings and plumbing connection...
Эта инструкция также подходит к моделям:Электрогенераторы - AK10 (202.82 kb)
Электрогенераторы - AK10 (202.82 kb)
Электрогенераторы - AK5 (202.82 kb)
Электрогенераторы - AK7 (202.82 kb)