Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Ensure that the plug is pushed fully home. (Up to the indication mark.) The green pilot light comes on. • The shaver can be connected to mains voltages between 100 and 240 Volts. • It takes about 16 hours to charge the shaver completely. • Fully charged, the shaver will give a maximum of 30 minutes of cordless shaving time. About the rechargeable battery To guarantee a long life for your rechargeable battery, please observe the following requirements: • Charge and store the shaver at temperatures between 5° and 35°C. • Do not leave the shaver connected permanently to the mains. 2 Shaving • Make sure the shaver is properly charged. • With shaver type HQ 2810/HQ 2830, you can also shave directly from the mains. When the battery is completely empty, wait a few seconds before switching on. • With shaver type HQ 2610, you can not shave on mains power. Therefore, recharge the appliance directly after shaving. • Ensure that the shaver never comes in contact with water. • You obtain the best shaving results on a dry skin. Preferably shave before or some time after washing. BSwitch the shaver on by keeping the small knob on the switch pressed-in and sliding the switch upwards. This security feature prevents the shaver from being switched on accidentally. BMove the shaving heads quickly over the skin. Make both straight and circular movements. BStretch the skin with your free hand. • This will bring the hairs upright and provide a closer shave. • Long hairs on the neck can also be shaved off in this way. Please bear in mind that your skin may need two to four weeks to become fully accustomed to the unique Philishave shaving system. Trimmer The trimmer has especially been designed for grooming sideburns and moustaches. • It is possible to switch the trimmer on while the motor is running. BPush the slide upwards to flip the trimmer out. 3 Cleaning BSwitch the shaver off. Use the small brush provided. It is possible to clean the shaving unit by means of a degreasing liquid (alcohol for example). Lubricate the shaving heads and the trimmer with a drop of sewing machine oil. Trimmer BAlways clean the trimmer after use. Lubricate the teeth of the trimmer every six months. Shaving unit • Every week. BClean the top of the shaving unit first. Remove the shaving unit from the shaver and clean the inside. Shaving heads • Every 2 months. BDisassemble the shaving unit in order to clean the shaving heads. Turn the wheel counter clockwise and remove the retaining frame. Slide one shaving head (guard and cutter) out of the frame. Keep your finger under the shaving head to prevent the cutter from falling out of the guard. Clean each shaving head (cutter and guard) separately. This is essential since the cutter has been ground with the guard. If you should accidentally mix up the guards and cutters, it may take several weeks before optimal shaving performance is restored. Clean each cutter carefully by brushing in the direction of the arrow only, using the short bristled br...
Эта инструкция также подходит к моделям:Электробритвы - HQ2810/01 (1.59 mb)
Электробритвы - HQ2810/33 (1.59 mb)