Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
6. Turn on iAUDIO E2 again, and confirm that a music file can play back normally. - Fully charge the player before upgrading the firmware. - Do not turn off the player before firmware upgrade is complete. It may damage the product, and will void any warranty. - Back up any important data before the firmware upgrade as any data stored on the device may be deleted during the process. COWON accepts no liability for any loss of data. Basic Use + LED Lamp Description The iAUDIO E2 LED can display either green or red. The following table provides a detailed description of the colors and the LED status. Function LED display Outline Description POWER ON Green LED On > Off after booting It appears immediately after the product is turned on, or after the USB is connected, and turns off after booting is complete. POWER OFF Red LED On > Off It appears immediately after the product is turned on, or after the USB is connected, and turns off after booting is complete. Playback ... Green LED On > Off > On (repeated blinking at intervals of 3 seconds) Music file is being played after booting. Charging Red LED On (with the USB connected) The battery is charging. Charging complete Green LED On (with the USB connected.) Charging completed. Connected to PC. Charging error ... Red LED On > Off > On > Off (with the USB connected, blinking at intervals of 0.5 seconds) Error occurred while charging. Discharged Three warning beeps will sound and the red LED will blink three times, and the power is turned off. Low battery. Firmware upgrade ... The green LED will continue to blink at intervals of 0.25 seconds. Firmware updating is in progress. Basic Use + Music Playback and Using the Product [POWER on/off and music playback] 1. You can turn on the product by pressing the POWER button on the right. As an indication, the green LED lamp blinks momentarily and music starts playing. - With the power turned on, connect the earphones to the iAUDIO E2, and then music will automatically play. Once the earphones are removed, music playback stops. - More than one minute after the earphones are removed, iAUDIO E2 automatically turns off. - When there are no music files in the unit memory, the green LED lamp will blink, and you will hear no sound. 2. iAUDIO E2 can be turned off with a beep sound by pressing the POWER button. [Adjusting the Volume] - Use + and – button to adjust the volume. - Maximum volume for iAUDIO E2 is 40. ¦ Protect your hearing with iAUDIO E2’s auto volume feature. iAUDIO E2 automatically plays music if an earphone is connected and powered on. When the last volume setting is higher than level 20, it will be automatically adjusted to level 20 when turned on next time. In case the volume setting was lower than level 20, there will be no change. [Selecting a track] Briefly press FF/REW button to select the music track. - Briefly press FF button to skip to next track. - Briefly press REW button to return to the previous track, while when the music plays for more than 5 seconds it goes back to the beginning of the track [Rewind/Fast Forward] Press and hold FF/REW button to rewind or fast forward. - A beep will sound during FF/REW. [Setting up the sound effect] Press the menu button to assign various sound effects. - iAUDIO E2 is equipped with 9 sound effects featuring BBE+ technology. - Each preset is announced by a voice guide when pressing the Menu button. - Sound effect sequence as follows: ¦ BBE+ sound effect Normal > BBE > BBE ViVA > BBE ViVA 2 > BBE Mach3Bass > BBE MP > BBE Headphone > BBE Headphone 2 > BBE Headphone 3 > then, loop Press and hold menu button to activate shuffle function. (voice guide: ‘Shuffle On’). The shuffle function plays back stored music files in a random sequence. Press and hold menu button again to deactivate shuffle function. [Reset] Press reset button on the rear of the unit to cut the power to iAUDIO E2. Basic Use + Music Playback and Using the Product - The Reset function should be used only when iAUDIO E2 is not responding. - Use a pencil or clip that has a pointed end when you reset the product, and use caution not to press the LED lamp next to the Reset button instead. Basic Use + Music Playback and Using the Product Additional + Product Specifications Hardware Audio Earphone Channel Stereo Frequency Range 20Hz ~ 20KHz Sound Output Left 12mW + Right 12mW (16 . Earphone) SNR 95dB Power Battery Internal Lithium Polymer Battery Charging USB: ~ 1.5 hrs * on the condition that Input exceeds 5V/500mA * Capacity Flash Memory 2GB / 4GB, FAT32 file system ** USB Interface USB Device USB 2.0 High Speed Buttons POWER, MENU, VOL+, VOL-, FF, REW General Dimension 26.6mm x 64.2mm x 7.7mm (W x L x H) Weight 16.6g (Including internal Battery) Working Temperature 0. ~ 40. System Requirements CPU Pentium III 500 MHz or higher OS Windows Vista / XP / 2000 / ME MAC OS 10.X / Linux v2.4 or higher: Data transfer supported *** USB Port 2.0 High Speed Recommended Applications - Application can be modified with improv...