Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
3 Turn razor OFF by pressing the on/off button once. The green light ring around the on/off button goes OFF. Put the protective razor head cap on the razor to protect razor heads. For optimal shaving results, replace Philips Norelco razor heads (model #HQ8) once a year. C2 C3 C4 C2 C3 C4 14 1414 ENGLISH Trimming To groom sideburns and moustache: 1 Turn razor ON. Push down spring-release trimmer switch. The trimmer can be activated while the razor is running. Hold trimmer as shown and move in downward strokes with gentle pressure. Close trimmer by pressing trimmer down. 5 Turn razor OFF. Cleaning C . The tap symbol on the back of the razorindicates that the razor can be rinsed under running tap water. . Regularcleaning guarantees better shaving results. . Always switch Razor OFF, unplug and remove power cord before cleaning. . Never clean, remove or replace head assembly while motor is on. . Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs. . Do not use razor if combs are damaged or broken. Facial injury may occur. CC2 C3 C4 ENGLISH 15 Cleaning: Razor Heads The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. . Regular cleaning guarantees better shaving results. . Do not immerse razor in water. . While rinsing razor heads,water may drip out of the base of razor.This is a normal occurrence. Always turn razor OFF, unplug from outlet and remove cord from razor before cleaning. Press the Razor Head Release Button, flip open the Razor Head Assembly. Clean inside razor heads and hair chamber by running under hot water. Clean outside of Razor Head Assembly by running under hot water. 5 Close the Razor Head Assembly and shake off excess water. 16 ENGLISH C 6 Open Razor Head assembly again and leave open to air dry. NOTE: Do not wipe or dry the shaving heads with a towel or tissue. This could damage the shaving heads. C 7 If the shaving unit becomes detached from the razor, you can easily reattach it. 8 You may also clean the hair chamber without water by using the supplied brush. Once A Month: Razor Heads Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored. 1 Turn razor OFF, remove the charging plug from the outlet and cord from the razor. C 2 Press the razor head release button to open the razor head assembly. C 3 Turn the black 3-pronged locking bracket counterclockwise (1) and remove the retaining frame (2). ENGLISH 17 C 4 Remove and clean one set of cutters and combs at a time. C 5 Separate the cutter from the comb and rinse clean under hot water. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. C 6 Replace the set back into the Razor Head Assembly so that the “wings” on the comb fit within the brackets located towards the center of the Assembly. The set will only fit into the Razor Head Assembly if the ‘wings’ are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses. 7 Repeat the process for the other two sets of cutters and combs. 8 Replace the frame. C 9 Press down (1) and turn the black 3-pronged locking bracket clockwise (2) until it locks into place. 18 ENGLISH 10 Close the Razor Head Assembly. Once A Month: Razor Heads For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. rubbing alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. After Each Use: Trimmer C3 C4 1 2 Turn razor OFF. Push down spring-release trimmer switch. Clean trimmer with the brush every time you use it. Lubricate the trimmer teeth with one drop of mineral oil every 6 months. 5 Close trimmer by pressing trimmer down. This razor has no other user-ser viceable par ts. For assistance call 1-800-243-3050. C ENGLISH 19 Replacing the Razor Heads . Replace the razor heads once a year for optimal shaving results. . Replace damaged or worn razor heads with model HQ8 Philips Norelco razor heads only. Storage . Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. . Do not wrap cord around razor when storing. . Store cord in a safe location where it will not be cut or damaged. . Do not keep razor permanently plugged into outlet. . Do not place or store razor where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. . Put the Protective Razor Head Cap on razor to protect heads. 20 ENGLISH Assistance .For assistan...
Эта инструкция также подходит к моделям:Электробритвы - 7325XL/17 (1.07 mb)
Электробритвы - 7315XL/17 (1.07 mb)