Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
ever y 15 days. Cleaning the Jet Clean system Clean the cleaning chamber ever y 15 days. You can wipe the outside of the Jet Clean System with a damp cloth. 1 Simultaneously press the release buttons on both sides of the Jet Clean System (1).Then lift the Jet Clean System off the cleaning chamber (2). The cleaning chamber remains behind. ,2 Pour any remaining cleaning fluid out of the cleaning chamber. You can simply pour the cleaning fluid down the sink. 3 Rinse the cleaning chamber under the tap. The cleaning chamber is not dishwasher-proof. 4 Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines. 22 English 5 Place the Jet Clean System back onto the cleaning chamber. Make sure the release buttons click back into place. Extra-thorough cleaning method Make sure the appliance is switched off. 1 Pull the shaving head holder off the bottom part of the shaving unit. 2 Slide the green retaining frame in the direction of the arrows indicated on the retaining frame. 3 Lift the retaining frame out of the shaving head holder. 4 Remove the cutter from the shaving guard. Note: Do not clean more than one cutter and shaving guard at a time, since they are all matching sets. If you accidentally put a cutter in the wrong shaving guard, it may take several weeks before optimal shaving performance is restored. 5 5 English 23 6 7 8 9 Clean the cutter with the cleaning brushsupplied. Clean the inside of the shaving guard. After cleaning, place the cutter back into the shaving guard with the cutter legs pointing downwards. Place the retaining frame back onto the shaving head holder. Slide the guard back into place (‘click’). 24 English 10 Reattach the shaving head holder to the bottom part of the shaving unit. Cleaning the trimmer Switch on the appliance with the trimmer attached. Rinse the trimmer under a hot tap for some time. After cleaning, switch off the appliance. Clean the trimmer ever y time you have used it. 1 2 3 Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop of sewing machine oil every six months. storage 1 2 Slide the protection cap onto the shaving unit to prevent damage to the shaving heads. Specific types only:You can also store the shaver in the pouch supplied. Replacement For maximum shaving performance, we advise you to replace the shaving head holder ever y 12 months. Only replace the shaving head holder with an original RQ11 Philips shaving head holder. English 25 Replacement reminder To remind you to replace the shaving head holder, the appliance is equipped with a replacement reminder which is activated automatically after approx. 12 months.The replacement reminder is repeated at 9 successive shaves or until you reset the shaver. 1 The shaving unit symbol flashes when you switch off the shaver. Note:The displays of the various shaver types look different, but show the same symbol. 2 3 Pull the shaving head holder off the bottom part of the shaving unit. Attach the new shaving head holder to the bottom part of the shaving unit (‘click’). 4 To reset the shaver, press and hold the on/off button for approx. 10 seconds. Note: If you do not reset the shaver at the first replacement reminder, it continues to show the shaving unit symbol at 8 more shaves or until you reset the shaver. Ordering accessories To purchase accessories for this appliance, go to your Philips dealer or a Philips ser vice centre. If you have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer Care Centre in your countr y.You find its contact details in the worldwide guarantee leaflet. 26 English The following par ts are available -HQ8505 adapter -RQ11 Philips Shaving Head Holder -HQ110 Philips Shaving Head Cleaning Spray -HQ200 Philips Cleaning Fluid -RQ111 Beard Styler attachment shaving head holder -We advise you to replace the shaving head holder ever y 12 months. Always replace the shaving head holder with an original RQ11 Philips Shaving Head Holder. Cleaning -Specific types only: use Jet Clean Solution (HQ200) for regular cleaning of the shaving heads. Environment -Do not throw away the shaver and the Jet Clean System (specific types only) with the normal household waste at the end of their life, but hand them in at an official collection point for recycling. By doing this, you help to preser ve the environment. -The built-in rechargeable shaver batter y contains substances that may pollute the environment. Always remove the batter y before you discard or hand in the shaver at an official collection point. Dispose of the batter y at an official collection point for batteries. If you have trouble removing the batter y, you can also take the appliance to a Philips ser vice centre. The staff of this centre will remove the batter y for you and will dispose of it in an environmentally safe way. English 27 Removing the rechargeable shaver battery Only remove the rechargeable battery when you discard the shaver. Make sure the battery is...
Эта инструкция также подходит к моделям:Электробритвы - RQ1141/16 (3.37 mb)
Электробритвы - RQ1145/17 (3.37 mb)