Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель HP6301/00

Производитель: Philips
Размер: 826.36 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


B Remove the batteries if the appliance is not going to be used for a month or more. B Do not leave empty batteries in the appliance. Using the appliance The Ladyshave is suitable for: -shaving the underarms; -shaving the legs; -shaving the bikini line. On wet skin You can use your Ladyshave on wet skin, e.g. while having a bath or shower. The best results are obtained if you lather your skin (with soap or shaving cream) before you start shaving (fig. 4). On dry skin If you prefer to use the Ladyshave dry, make sure that your skin is clean and completely dry. B There is no difference between using the appliance on wet or and using it on dry skin. B Do not apply alcohol-based lotions to the skin directly before or after shaving. If you want, you can apply some talcum powder. B Avoid pressing the shaving head too hard onto the skin as this will adversely affect shaving performance and may cause some skin irritation. Legs and bikini line 1 Switch the appliance on by moving the slide (F) to position I (fig. 5). Stretch the skin with your free hand to make the hairs stand upright. 2 3 Place the straight trimmer (C) and the shaving foil (D) gently on the skin. Move the Ladyshave slowly over the skin against the direction of hair growth while pressing it lightly (fig. 6). . You can attach the protection cap to the bottom of your Ladyshave when you are shaving your legs and bikini line. The cap will make the Ladyshave longer, allowing you to better reach these areas (fig. 7). 4 Switch the appliance off by moving the slide (F) to position O (fig. 8). Underarms 1 Switch the appliance on by moving the slide (F) to position I (fig. 5). When shaving the underarm area, place on arm behind your head to stretch the skin. 2 3 Place the rounded trimmer (E) and the shaving foil (D) gently on the skin. Move the Ladyshave slowly over the skin. You can move the Ladyshave up and down or from left to right (fig. 9), depending on which movement you find most pleasant. 4 Switch the appliance off by moving the slide . To avoid damage due to battery leakage: B (F) to position O (fig. 8). Do not expose the Ladyshave to direct sunlight. B Do not expose the appliance to temperatures higher than 35cC. ENGLISH Storage The environment Put the protection cap on your Ladyshave after use. The protection cap prevents the shaving foil and two trimmers from becoming damaged. Cleaning the appliance Clean the Ladyshave every time you have used it. Do not use any corrosive detergents, scouring pads or cloths, petrol, acetone etc. to clean the appliance. Do not exert any pressure on the shaving foil to avoid damage. After each use 1 2 Switch the appliance off. Rinse the appliance under the tap (fig. 10). Do not clean, rinse or immerse the Ladyshave in water if the cover of the battery holder is not properly closed. Do not use water that is hotter than shower temperature to clean the appliance. 3 4 5 Remove the shaving head (B) from the appliance (fig. 11) to clean the hair chamber and the shaving head. Rinse the hairs off the shaving head (fig. 12) and the appliance (fig. 13). Put the shaving head back onto the appliance ('click'). From time to time Once a year in case of normal use. 1 2 3 4 5 Remove the shaving head (B) from the appliance (fig. 11). Release the shaving foil unit from the trimmer unit (1) and separate the two units (2) (fig. 14). Brush the shaving foil and the cutter block carefully (fig. 15). Place the shaving foil unit on a solid and flat surface and press the trimmer unit back onto the shaving foil unit (fig. 16). Put the shaving head back onto the appliance ('click'). Maintenance and replacement Lubricate the shaving foil with a drop of sewing machine oil twice a year (fig. 17). If you use the Ladyshave twice a week or more, we advise you to replace the shaving foil and cutter block every one to two years. . The shaving foil may only be replaced with an original Philips shaving foil (type HP2904). . The cutter block may only be replaced with an original Philips cutter block (type HP2907). Make sure the batteries are completely empty when you dispose of them. Do not throw batteries away with the normal household waste, but hand them in at an official collection point. Troubleshooting guide 1 Reduced shaving performance. B Cause 1:The shaving head is dirty. . Remove the shaving head and release the shaving foil unit from the trimmer unit. . Clean the shaving foil and the cutter block. . You can clean both parts by rinsing them under the tap. . Remove any hairs that might be stuck under the trimmer! B Cause 2:The appliance runs too slowly (the shaver produces a weak sound). . Change the batteries. . Clean the shaving head. . Lubricate the shaving head with a few drops of sewing machine oil. 2 Stronger skin irritation than usual. B Cause 1: Shaving foil is damaged or worn. . Replace the shaving foil. 3 Appliance doesn't work. B Cause 1: The batteries are empty. . Replace the batteries. B Cause 2: Batteries have not been placed in the...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории