Оценок - 3, средний балл: 4.3 ( )

Производитель: Remington Размер: 734.32 kb Название файла: Язык инструкции:

This helps remove hairs while keeping your shaver operating smoothly. Trimmer Care The trimmer on your R e m i n g t o n®MicroScreen® 2 Shaver is easy to maintain. n When you clean your shaver, just brush off any clippings that may accumulate around the trimmer Assembly. Using the longer bristles on the brush supplied will enable you to get into the area between the trimmer and the shaver. n Every six months, lubricate the trimmer teeth by applying a drop of light machine oil one-third and two-thirds of the way along the blade. Using your finger tip, spread the oil along the teeth, and run the trimmer for a few seconds. Replacing Foils and Cutters Because they are subject to daily use, the cutters and foils of your R e m i n g t o n® MicroScreen® 2 Shaver will wear and eventually re q u i re replacement to maintain a close, comfortable shave. Depending on your shaving technique and habits, the foils will usually last six months; the cutters, one year. Model DA-757 has a foil replacement indicator. The foil icon on the LCD display will flash when the foil is due for replacement. Some signs that your foils and cutters need replacing are : n Irritation. As foils get worn, you may notice your skin feeling sensitive after a shave, particularly when you apply aftershave. n Pulling. As cutters wear, your shave may not feel as close, and you may feel your shaver is pulling at your whiskers. n Wear-through. You may notice that the cutters have worn through the foil. To order replacement foils and cutters, call 1-800-736-4648. To prevent inadvertent damage to the Foils and Cutter Assembly, do not attempt to remove them unless you are replacing them. To remove the old foil and cutters follow the instructions that come with the foil and cutter replacement package. It's always a good idea to replace the foils when you replace the Cutter Assembly. To Replace a Cutter Assembly That is Removed Unintentionally: n Hold the assembly in the middle of the "T." n Gently place the forked legs into the opening at the top of the oscillator tips. n Do not push downward on the ends of the cutters, as you may bend the cutter, reducing its ability to operate smoothly. n Do not remove cutters from the plastic pieces to which they are attached, as you may damage the assembly. Removing the Headguard Before operating your MicroScreen® 2 Shaver, remove the Headguard, which protects the Foils and Cutter Assembly. It is important to remove the Headguard correctly to avoid damaging the clips that hold it firmly to the shaver. n Press lightly on the top of the Headguard. n Lift the lower rear edge. n Pull the Headguard away from the shaver. Operation Use of a shaver at voltages other than the ones specified below will damage it and void the warranty. Model DA-57, DA-107 - Corded Shavers 120 Volts A.C. Model DA-307, DA-325 - Rechargeable Shaver World-wide A.C.voltage:105-130 Volts A.C. at 60 Hz,and 105-240 Volts,A.C. at 50 Hz. Model DA-407 - Cord/Cordless Shaver World-wide A.C. voltag...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: