Оценок - 5, средний балл: 3.2
(
)
)
|
Фрагмент инструкции
¦ If the fax machine is interrupting callers before they can leave a message, try a longer Quiet Detect Time setting. If your outgoing message includes a period of silence, make sure that the setting is longer than that period of silence, or re-record your outgoing message to shorten the silence. Note: Quiet Detect Time can be turned off by entering "00" for the time. Note, however, that the fax machine will not be able to receive faxes sent manually by Normal Dialling. To change the setting, follow the steps below. 1 Press once and once. 2 Press once and 4 times. 3 Press once. 4 Enter a number from 01 to 10, or enter 00 to turn off the function. Example: 3 seconds 5 Press to return to the date and time display. FUNKTION 0 3 STOP Display: OPTION SETTING QUIET TIME ENTER (00-10) 04 The display briefly shows your selection, then: QUIET START Optional A.M. Mode Settings 55 5. Answering Machine On A.M. Failure When this function is turned on, your fax will answer the call after 5 rings if the answering machine for some reason fails to answer before that time. This ensures that you will receive fax messages even if the answering machine’s tape fills up or the answering machine is not turned on. This function has been turned off at the factory. If you want to turn it on, follow the steps below: Note: When this function is turned on, make sure that the answering machine is set to answer on 4 rings or less. If it isn’t, the fax will always answer first, preventing callers from leaving voice messages. 1 Press once and once. 2 Press once and 6 times. 3 Press once. 4 Press to turn on the function, or to turn it off. 5 Press to return to the date and time display. FUNKTION 1 2 STOP Display: OPTION SETTING ON A.M. FAILURE 1=YES, 2=NO The display briefly shows your selection, then: LANGUAGE Optional A.M. Mode Settings 56 Quiet Detect Start Time This setting can be used to delay the start of the Quiet Detect Time function. For example, if you want to insert a pause at the beginning of your answering machine’s outgoing message to ensure clear detection of fax signals, you can use this setting to delay the start of silence detection so that the pause will not cause the fax to take over the line. Quiet Detect Start Timing has been turned off at the factory. If you want to use this function, turn it on by entering a 2-digit number equal to the desired number of seconds of the delay. As general guide, the delay time should be slightly longer than the pause before the outgoing message. 1 Press once and once. 2 Press once and 5 times. 3 Press once. 4 Enter a 2-digit number (from 01 to 15) for the number of seconds of the delay, or enter 00 to turn off the function. Example: 5 seconds 5 Press to return to the date and time display. FUNKTION 0 5 STOP Display: OPTION SETTING QUIET START ENTER (00-15) 00 The display briefly shows your selection, then: ON A.M. FAILURE 57 6. Special Functions 6. Special Functions Caller ID (Requires Subscription to Service) Note: The Caller ID function is not available in some countries. If you subscribe to a caller identification service from your telephone company, you can set your fax machine to display the name and number of the caller while the fax rings. Important: ¦ To use this function, you must subscribe to a caller identification service from your telephone company. ¦ Your fax may not be compatible with some caller identification services. 1 Press once and once. 2 Press once and 4 times. 3 Press once. 4 Press (YES) to turn on Caller ID. (To turn off Caller ID, press .) 5 Press to return to the date and time display. FUNKTION 1 2 STOP Display: OPTION SETTING CALLER-ID 1=YES, 2=NO RECEIVE RATIO The display briefly shows your selection, then: Caller ID (Requires Subscription to Service) 58 How Caller ID operates When you receive a call, the name and phone number of the caller will alternately appear in the display, beginning just before the second ring. The information will continue to be displayed until the line is disconnected. Note: Some caller ID services may not provide the name of the caller. In this case, only the phone number will appear. Display messages One of the following messages will appear while the fax rings if caller information is not available. NO SERVICE No caller information was received from your telephone company. Make sure that the telephone company has activated your service. CALLER-ID ERROR Noise on the telephone line prevented reception of caller information. OUT OF AREA The call was made from an area which does not have a caller identification service, or the caller’s service is not compatible with that of your local phone company. WITHHELD Caller information was not provided by the telephone company at the caller’s request. Display example Caller’s name Caller’s number JOHN DOE 5258693 Caller ID (Requires Subscription to Service) 59 6. Special Functions Viewing the Caller ID list If you subscribe to a Caller ID service and have turned on the Caller ID function, your...