Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
. Make sure that the appliance does not get wet. . This appliance is only designed for trimming the human beard and grooming nose hair, ear hair, eyebrows, moustache and sideburns. . Keep the appliance out of the reach of children. Charging Charge the appliance fully before you start using it for the first time. 1 Make sure the appliance is switched off. 2 Insert the appliance plug into the appliance (Fig. 2). 3 Put the mains plug into the wall socket. . After a few moments the green pilot light will go on to indicate that the appliance is charging (fig. 3). It will take approx. 10 hours to fully charge the battery. To optimise the lifetime of the appliance, do not charge it for more than 24 hours. A fully charged appliance has a cordless trimming time of up to 40 minutes. B To optimise the lifetime of the rechargeable battery, we advise you to use the appliance until the battery is completely empty when the appliance has been charged for the first time. Do not recharge the appliance in between trimming sessions. Continue using the appliance until the motor almost stops running during a session.Then recharge the battery. Follow this procedure at least twice a year. 4 If the battery is empty and you want to trim your beard, charge the appliance for at least 1.5 hours and you will have enough power for one trimming session. Trimming Always comb the beard, moustache and/or sideburns with the attached Barber's Comb before you start trimming. Do not move the appliance too fast. Make smooth and gentle movements. . To trim with the appliance disconnected from the mains: 1 Unplug trimmer from the outlet. Trimming with comb attachment The flexible combs (2D-Contour Tracking System) adjust to the contours of the face, the trimmer is easy to manoeuvre. Demanding areas, such as the chin- and throat area, are treated easily and an even cut is obtained. Put on one of the exchangeable combs.To assemble the comb, insert the hook of the comb into the appliance and push it down until you hear a click. 1 Slide the adjustment comb to the desired trimming length setting (fig. 4). The chosen setting is indicated by the arrow. Length setting table The trimmer has 2 exchangeable comb attachments with 5 settings each, resulting in 10 different hairlengths that can be cut: . Small comb (setting 1-5): resulting in a hairlength of 1.5 - 9 mm . . Big comb (setting 1-5): resulting in a hairlength of 10 - 17 mm. . The resulting hairlength corresponds with the smallest distance between the cutting blade and the spot where the comb is in contact with the skin (fig. 5). B If you are using the trimmer for the first time, start at the maximum trimming length setting: setting 5 with big comb. 2 Switch the appliance on. 3 To trim in the most effective way, move the trimmer against the direction of hair growth. Make sure the surface of the comb always stays in contact with the skin (fig. 6). 4 If a lot of hair has accumulated in the comb, remove the comb attachment and blow and/or shake the hair out of the comb.The selected trimming length setting will not change when you do this (fig. 7). Trimming without comb attachment 1 Remove the comb attachment by pulling it off the appliance (fig. 8). Never pull at the flexible top of the comb attachment. Always pull at the bottom part. Cutting without comb attachment (or with position '0') will result in a very short stubble beard. 2 Switch the appliance on. 3 Make well-controlled movements.Touch the hair lightly with the trimmer (fig. 9). Grooming Do not use the attachment with a damaged or broken cutting or grooming attachment as injury may occur. Use the grooming attachment . For trimming nose hair, ear hair and eyebrows: 1 Move the comb into position '0' and remove the trimming attachment (fig. 10). 2 Assemble the grooming attachment by inserting it's hook into the housing and push it back until you hear a click (fig. 11). Cutting nose hair Make sure nasal passages are clean 1 Switch the groomer on. 2 Insert the groomer in one nostril and slowly move it in and out.Turning it around the same time to remove unwanted hair (fig. 12). For best results, make sure the side of the tip is firm against skin.This will reduce the tickling effect than can occur during trimming nose hair. Do not insert the tip more than 0.5 centimetres into your nostril. Cutting ear hair Clean outer area of ear and make sure it is free of wax. 1 Switch the groomer on. 2 Move the tip softly around the edge of ear to remove hairs extending beyond the outer ear.Then carefully insert the tip into outer ear (fig. 13) Do not insert the tip more than 0.5 centimetres into your ear as this could damage the eardrum. Cutting eyebrows It is not recommended that you use the groomer to define or trim the entire eyebrow. 1 Switch the groomer on. 2 Use the tip to cut individual eyebrow hairs (fig. 14). 3 Put on the groomer at the root of the nose and move it along the eyebrow into the direction of hairgrowth (fig. 15). Do not trim your eyelash, b...