Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
ENGLISH
Cleaning and maintenance
6 Put the shaving unit back onto the shaver.
Never use scouring pads, abrasive cleaning agents or
Accessories
Introduction
aggressive liquids such as petrol or acetone to clean the The following accessories are available:
Congratulations on your purchase and welcome to
appliance.
Philips! To fully benefit from the support that Philips offers, Regular cleaning guarantees better shaving performance.
-
HQ4 Ç Philips shaving heads.
register your product at www.philips.com/welcome.
For easy and optimal cleaning, Philips Shaving Head
-
HQ110 Philips Shaving Head Cleaning Spray.
Cleaning Spray (type no. HQ110) is available. Ask your
Important
Environment
Philips dealer for information.
Read this user manual carefully before you use the
-
Do not throw away the appliance with the normal
appliance and save it for future reference.
Note: Philips Shaving Head Cleaning Spray may not be
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
Warning
available in all countries. Contact the Customer Care Centre
this, you help to preserve the environment (Fig. 16).
-
This appliance is not intended for use by persons
in your country about the availability of this accessory.
-
Batteries contain substances that may pollute the
(including children) with reduced physical, sensory
You can also clean the shaver in the following way:
environment. Do not throw away batteries with the
or mental capabilities, or lack of experience and
Every week: shaving unit and hair chamber
normal household waste, but dispose of them at an
knowledge, unless they have been given supervision
official collection point for batteries. Always remove
or instruction concerning use of the appliance by a
1 Switch off the shaver.
the batteries before you discard and hand in the
person responsible for their safety.
appliance at an official collection point.
-
Children should be supervised to ensure that they
2 Clean the top of the appliance first. Use the
do not play with the appliance.
cleaning brush supplied (Fig. 8).
Guarantee & service
Caution
3 Press the release button (1) and remove the
If you need information or if you have a problem, please
-
Keep the appliance dry (Fig. 1).
shaving unit (2) (Fig. 9).
visit the Philips website at www.philips.com or contact
-
Use and store the appliance at a temperature
4 Clean the inside of the shaving unit and the hair
the Philips Customer Care Centre in your country
between 15°C and 35°C.
chamber with the brush (Fig. 10).
(you find its phone number in the worldwide guarantee
-
Remove the batteries from the appliance if you are
leaflet). If there is no Customer Care Centre in your
not going to use it for some time.
5 Put the shaving unit back onto the shaver.
country, go to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and
Compliance with standards
Every two months: shaving heads
Personal Care BV.
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
1 Switch off the shaver.
Guarantee restrictions
properly and according to the instructions in this user
2 Press the release button (1) and remove the
The shaving heads (cutters and guards) are not covered
manual, the appliance is safe to use based on scientific
shaving unit (2) (Fig. 9).
by the terms of the international guarantee because they
evidence available today.
are subject to wear.
3 To remove the retaining frame, push the sides of
Preparing for use
the central spring towards each other (1). Then
Inserting batteries
lift the retaining frame out of the shaving unit
(2) (Fig. 11).
The appliance runs on two R6 AA 1.5-volt batteries.
Preferably use Philips alkaline batteries.
4 Slide the shaving heads out of the retaining frame
and clean them one by one (Fig. 12).
Make sure that your hands are dry when you insert the
batteries.
Do not mix up the cutters and the guards.
1 Remove the lid of the battery compartment (Fig. 2)
This is essential since each cutter has been ground with
its corresponding guard for optimal performance. If you
2 Place two batteries in the battery
accidentally mix up the sets, it could take several weeks
compartment (Fig. 3).
before optimal shaving performance is restored.
Note: Make sure the + and - indications on the batteries
5 Clean the cutter with the short-bristled side of the
match the indications in the battery compartment.
cleaning brush (Fig. 13).
Brush carefully in the direction of the arrow.
Note: The shaver does not work if the batteries have been
6 Clean the guard with the cleaning brush (Fig. 14).
placed incorrectly.
7 Slide the shaving heads back into the retaining
3 Put the lid of the battery compartment back onto
frame and put the retaining frame back into the
the appliance. First place the top part of the lid (1)
shaving unit (Fig. 15).
and then press down the bottom part until you
hear a click (2) (Fig. 4).
8 Put the shaving unit back onto the shaver.
How to avoid damage due to battery
Extra thorough cleaning
For extra thorough cleaning, put the shaving heads in
leakage
a degreasing liquid (e.g. alcohol) every six months. To
-
Do not expose the appliance to temperatures higher remove the shaving heads, follow steps 1 to 4 described
than 35°C.
above. After cleaning, lubricate the central point on the
-
Remove the batteries if the appliance is not going to
inside of the guards with a drop of sewing machine oil to
be used for a month or more;
prevent wear of the shaving heads.
-
Do not leave empty batteries in the appliance.
Storage
Shaving time
1 Switch off the shaver.
Two new batteries offer a cordless shaving time of 60
minutes.
2 Put the protection cap on the shaver after use to
prevent damage to the shaving heads (Fig. 7).
Using the appliance
Replacement
Shaving
Replace the shaving heads every 2 years for optimal
Your skin may need 2 or 3 weeks to get accustomed to
shaving results.
the Philips shaving system.
Shaving on a dry face gives the best results.
Replace damaged or worn shaving heads with HQ4 Ç
Philips shaving heads only.
1 Press the switch lock and push the on/off slide
upwards to switch on the shaver (Fig. 5).
1 Switch off the shaver.
The switch lock prevents accidental switching on of the
2 Press the release button (1) and remove the
appliance.
shaving unit (2) (Fig. 9).
2 Move the shaving heads over your skin. Make both
3 To remove the retaining frame, push the sides of
straight and circular movements (Fig. 6).
the central spring towards each other (1). Then
3 Push the on/off slide downwards to switch off the
lift the retaining frame out of the shaving unit
shaver.
(2) (Fig. 11).
4 Put the protection cap on the shaver after use to
4 Slide the shaving heads out of the retaining frame
prevent damage to the shaving heads (Fig. 7).
and replace them with new ones (Fig. 12).
5 Put the retaining frame back into the shaving unit.
4222.002.4422.4
2/5
...