Оценок - , средний балл: ( )

Инструкция по эксплуатации Whirlpool, модель KEBS147D

Производитель: Whirlpool
Размер: 1.31 mb
Название файла: 42c25085-25e7-4e85-8a32-8883c86d59fd.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

8) pads conversion (pp. 12-13) pads (p. 29) Display/clock • When you first plug in the oven, a tone will sound, the display will be fully lit for a few seconds, and the display will show the last time set and “PF” (power failure). If, after you set the clock (page 14), the display again shows “PF”, your electricity was off for a while. Reset the clock. • The display will show “Err” and three short tones will sound if a time or temperature is incorrectly entered. To set your oven to cook in Celsius instead of Fahrenheit: PRESS and hold for 5 seconds Convect Oven Timer Cancel/off full meal light pad pads pads pad (p. 46) (p. 15) (p. 8) (p. 26) If you need to convert temperatures from Celsius to Fahrenheit or vice versa, you can refer to this chart: Temperature replacement values 38°C-100°F 163°C-325°F 60°C-140°F 177°C-350°F 66°C-150°F 191°C-375°F 77°C-170°F 204°C-400°F 93°C-200°F 218°C-425°F 121°C-250°F 232°C-450°F 135°C-275°F 246°C-475°F 149°C-300°F 260°C-500°F BROIL MAXI ECONO You will know you are in Celsius when “F” disappears. To switch back to Fahrenheit, press and hold BROIL again for 5 seconds. (“F” will reappear.) Using Your Oven Starting an operation After programming a function, you must press the Start pad to start the function. If you do not press the Start pad within START 5 seconds of programming, “START?” will show on the display as a reminder. Canceling an operation The Cancel/Off pad will cancel any function, except for the Clock and Timer functions. When you press the Cancel/Off pad, the small (single display will show the time of CANCEL OFF ovens) day, or if Timer is also being used, the time remaining. OR NOTE: To cancel the timer see page 16. (double ovens) NOTE: You may hear a fan blowing in the oven even after you press the Cancel/Off pad. This is the cooling fan. It will turn off when the oven cools. Changing audible signals Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed. To change pitch and loudness of key tone: PRESS and hold for 5 seconds 7 A short tone will sound and “Snd” and “Hi” or “Lo” will appear on the display. Repeat the step above to change to the other setting. To turn on and off end-of-cycle tones and reminder tones (single or double ovens): PRESS and hold for 5 seconds COOK TIME To turn on and off all reminder tones (single or double ovens): PRESS and hold for 5 seconds SET START• TIMER To turn on and off all tones (double ovens)/to turn on and off key pad entry tones (single ovens): PRESS and hold for 5 seconds STOP TIME A short tone will sound and “Snd” and “On” or “OFF” will appear on the display to tell you the signals have been changed. Repeat the step above to turn the signals back on. Selecting an oven (double ovens) To choose the oven you want to use, press the Upper Oven or Lower Oven pad. Finding out which oven is in use (on double ovens) Press the Upper Oven or Lower Oven pad. Upper oven or lower oven information will be displayed and the outer oven cavity symbol for the oven being programmed will flash. Using Your Oven Using the control lock The control lock prevents unwanted use of the oven by disabling the control panel command pads. NOTES: • On double ovens, control lock is only available when oven is not active or set. On single ovens, control lock is available when oven is active, but it is not available only during the Self-Cleaning cycle or the Sabbath mode. • On single ovens, the Cancel/Off pad will still work during control lock, but you will need to press it for 1 second. • On both single and double ovens, the control lock will not disable the Timer. On double ovens, the light, timer, and clock are still available during control lock. • Set control lock when cleaning the control panel to prevent oven from accidentally turning on. To lock the control panel: Press and hold the Control Lock pad (Number Pad 3) for 5 seconds. A single tone will sound and “CONTROL LOCK ” will appear on the display. To unlock the control panel: Press and hold the Control Lock pad (Number Pad 3) for 5 seconds. A single tone will sound after 5 seconds and “CONTROL LOCK ” will disappear from the display. Prompt for start If “START?” is lit, this means that the Start pad has not been pressed. If you do not press the Start pad, the programmed function will automatically be canceled in 5 minutes. Setting your single oven for theSabbath† If you want to set your oven to meet “no work” requirements for the Sabbath, follow these steps: 1. Turn the oven light on or off, as desired, by pressing the Oven Light pad. The oven light will stay turned on or off, whichever you chose, while in the Sabbath mode. Opening the door will not switch the oven light throughout the Sabbath mode. 2. Press BAKE. BAKE 3. Press Number Pads to set the tempera3 2 5 ture you want. (example for 325°F) 4. Press START. START 5. Press and hold Number Pad 6 for 5 seconds to go into the Sabbath mode. NOTE: The Sabbath mode is only available with th...