Оценок - 2, средний балл: 3.5 ( )

Производитель: Amana Размер: 552.75 kb Название файла: Язык инструкции:

This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, carbon monoxide, and toluene. PARTS AND FEATURES This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and appearances of the features shown here may not match those of your model. 1 2 3 4 1. Oven Vent 2. Broil Elements (not shown) 3. CleanBake™ Bake element (hidden in floor panel) 4. Lower Oven (on double oven models) 5. Electronic Oven Control 6. Automatic Oven Light Switch 7. Oven Lock Latch 8. T.H.E.™ (Third Hidden Element) Convection Element and Fan (in back panel) 9. Temperature Probe Jack (upper and single ovens only) 10. Gasket 11. Model and Serial Number Plate (on right mounting rail) 5 6 7 8 9 10 11 Parts and Features not shown Oven Light Third Oven Rack Broiler Pan and Grid Roasting Rack Temperature Probe ELECTRONIC OVEN CONTROL This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and appearances of the items shown here may not match those of your model. 1. Oven Display 7. Start 12. Oven Light 2. Timed Cooking 8. Upper or Lower Oven Selectors 13. Timer 3. Number Pads (double oven models only) 14. Upper and Lower Oven Cancel / Off4. Control Lock 5. Clock 6. Time of Day, Timer Display 9. Oven Option Selectors 10. EasyConvect™ Conversion 11. Convect Full Meal (double oven models) Cancel Off (single oven models) Displays When power is first supplied to the appliance, everything on the displays will light up for 5 seconds. Then, “PF” will appear on the oven display and a time of day will appear on the Time of Day display. Press LOWER OVEN CANCEL / OFF, UPPER OVEN CANCEL / OFF or CANCEL OFF to clear the oven display. If “PF” appears at any other time, a power failure has occurred. Press LOWER OVEN CANCEL / OFF, UPPER OVEN CANCEL / OFF or CANCEL OFF and reset the clock if needed. Oven Display When the oven(s) are in use, this display shows the oven temperature, heat source(s) and start time. On double oven models, this display will also show which oven is being set. The left cavity symbol represents the upper oven, and the right cavity symbol represents the lower oven. In addition, during Timed Cooking, this display shows a vertical bar and time countdown and the stop time (if entered). If “Err” appears on the oven display, an invalid pad was pressed. Press LOWER OVEN CANCEL / OFF, UPPER OVEN CANCEL / OFF or CANCEL OFF and retry your entry. When the ovens are not in use, this display is blank. Time of Day, Timer Display This display shows the time of day or Timer countdown. Start The START pad begins all oven functions except the Timer, Control Lock and Sabbath Mode. If not pressed within 5 seconds after pressing a pad, “START?” will appear on the oven display as a reminder. Depending on your model, if not pressed within 4 or 5 minutes after pressing a pad, the oven display will return to inactive mode (blank) and the programmed function will be canceled. Lower Oven Cancel / Off, Upper Oven Cancel / Off and Cancel Off The LOWER OVEN CANCEL / OFF, UPPER OVEN CANCEL / OFF and CANCEL OFF pads stop their respective oven functions except for the Clock, Timer, Control Lock and Sabbath Mode. The cooling fan may continue to operate even after an oven function has been canceled, depending on the oven temperature. Clock This is a 12-hour clock and does not show a.m. or p.m. To Set: Before setting, make sure the oven(s), Timer and Timed Cooking are off. On some models, the clock can be set when the oven(s) are on, however the start time will disappear. 1. Press CLOCK SET/START. 2. Press the number pads to set the time of day. 3. Press CLOCK SET/START or START. To Remove/Return Time of Day from Display: Press and hold CLOCK SET/START for 5 seconds. Repeat to redisplay. The time should not have to be reset. Tones Tones are audible signals, indicating the following: One tone ¦ Valid pad press ¦ Oven is preheated ¦ Function has been entered Three tones ¦ Invalid pad press Four tones ¦ End of cycle ¦ Reminder, repeating each minute after the end-of-cycle tones Tone Volume The volume is preset at high, but can be changed to low. To Change: Press and hold the number pad 7 for 5 seconds. On some models, a tone will sound and “Snd Lo” will appear on the oven display for 3 seconds. If “Snd Lo” remains on the display, press CANCEL to remove. Repeat to change back to “Snd HI.” All Tones (double oven models) All of the above tones are preset on, but can be turned off. To Turn Off/On: Press and hold STOP TIME for 5 seconds. On some models, a tone will sound and “Snd Lo” will appear on the oven display for 3 seconds. If “Snd Lo” remains on the display, press CANCEL to clear. Repeat to change back to “Snd HI.” Pad Press Tones (single oven models) The single tones signaling a valid pad press are preset on, but can be turned off. To Turn Off/On: Press and hold STOP TIME for 5 seconds. On so...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: