Оценок - 2, средний балл: 5 ( )

Производитель: Cres Cor Размер: 177.2 kb Название файла: Язык инструкции:

10 keys). Each Product Key can be user programmed for desired mode (PROBE or TIMED) and the required COOK, HOLD, and PROBE or TIME setpoints. A lamp associated with each Product Key gives visual indication of which Product Key has been activated. Pressing the Product Key a second time or changing the value of any of the setpoint values extinguishes the lamp and returns the controller to manual operation. Product Key Programming 1. Press the desired Product Key. 2. Press and hold the SET key until the Product Key light begins to flash. 3. Enter the desired Mode, Cook, Hold and Probe/Time values. NOTE: Press the SET key after each value is changed or added to accept and store a new setpoint. 4. To exit, Press the SET key for a few seconds until the Product Key light is extinguished. HOW TO SHUT DOWN OVEN: Push power switch to “OFF”. CAUTION Ventilating fans will continue to run until the cabinet is cool. Do NOT disconnect the power supply to the cabinet while the ventilating fan is still operating or damage to components could result. Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • Ovens FL-2202-MP-M Rev. 1 (4/08) Page 6 of 10 5925 Heisley Road • Mentor, OH 44060-1833 1. 2. .. Wipe up spills as soon as possible. .. Clean regularly to avoid heavy dirt build-up. CAUTION MAINTENANCE INSTRUCTIONS HOW TO CLEAN THE UNIT ALLOW CABINET TO COOL. REMOVE HOT UNIT BEFORE CLEANING. Cleaning Hints: 1. Use the mildest cleaning procedure that will do the job. 2. Always rub in the direction of the polish lines to avoid scratching the surface. 3. Use only a soft cloth, sponge, fibrous brushes, plastic or stainless steel pad for cleaning and scouring. 4. Rinse thoroughly with fresh water after every cleaning operation. 5. Always wipe dry to avoid water marks. HOW TO CLEAN THE UNIT: SOIL CLEANER METHOD ROUTINE CLEANING Soap, ammonia or mild detergent* and water. 1. Sponge on with cloth 2. Rinse CABINET STUBBORN SPOTS, Mild abrasive made for 1. Apply with damp sponge or cloth. STAINS Stainless Steel. 2. Rub lightly. Inside and Outside BURNT ON FOODS OR Chemical oven cleaner Follow oven cleaner manufacturer’s (Stainless Steel) GREASE made for Stainless Steel. directions. HARD WATER SPOTS & SCALE Vinegar 1. Swab or wipe with cloth. 2. Rinse and dry. * Mild detergents include soaps and non-abrasive cleaners MAINTENANCE INSTRUCTIONS TROUBLE-SHOOTING GUIDE WARNING IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT POWER AT BRANCH PANEL. DO NOT UNPLUG CORD! If hot unit is NOT working, first check the following causes: 1. Cord is unplugged from wall outlet. 3. Switch is turned off. 2. Circuit breaker/fuse to wall outlet is blown. 4. Thermostat is turned off, or is set too low. Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • Ovens FL-2202-MP-M Rev. 1 (4/08) Page 7 of 10 5925 Heisley Road • Mentor, OH 44060-1833 MAINTENANCE INSTRUCTIONS TROUBLE-SHOOTING GUIDE, continued PROBLEM POSSIBLE CAUSE SOLUTION Cabinet does not heat, or doesn’t heat p...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: