Оценок - 4, средний балл: 3
(
)
)
|
Фрагмент инструкции
Single 15" [38.1cm] diameter feed roller 13" [33cm] width with 1.25" [3.2cm] bearing. Roller contains 10 knife blades. Feed roller can be reversed without starting the disc. Smart Feed System with instant reverse and “Try Again" feed system. Automatically will re-try feeding limbs. Hydraulic feed roller with hydraulic jack. Easing maintenance and safety. Load-sensing Two-stage pump. Feed rate 0-125 feet per minute [0-46 meters/min]. Average 100 FPM [30 meters/min]. with infinite speed settings, dedicated neutral and full reverse, pump output. 6.6 gal [25 liter] per minute and 4HP with maximum pressure and maximum flow. Feed system operates under 1750 PSI [119atm], 3 gal. [11.4 liter] tank capacity. MANUAL BELT ENGAGEMENT LEVER FEED OPENING 6.5" X 13.5" [16.5cm x 91.4cm] 90° FEED ANGLE Quicker chipping because you are cutting through less wood. FEED CHUTE 6.5" X 13.5" [16.5cm x 91.4cm], tray 28.31" [71.9cm] off the ground. Feed table is 38" [96.5cm] long. Infeed hopper opening: height 33.8" [86cm], width 59" [150cm] Drop-down feed tray with locking safety pin. HINGED ENGINE COMPARTMENT Fully enclosed engine compartment for noise abatement. Steel 18-gallon [68 liters] gasoline/diesel fuel tank. .25" [6.35mm] steel disc housing. Hydraulic hose protection. HEAVY-DUTY CONSTRUCTION .375" [9.5mm] thick steel face plate on the disc housing; .25" [6.35mm] thick steel on the wrap around with welded construction. Frame is 2" x 2" [5cm x 5cm], .25" [6.35mm] wall thickness tubing. Table is 7 gauge [4.55mm] steel. Tongue is 2" x 2" [5cm x 5cm] with .25" [6.35mm] wall thickness. DISCHARGE CHUTE 360. rotation, 6.7" [17cm] square discharge chute. 18 positions for locking discharge chute in desired position. Deflector cap with screw- type adjustment at operator level. COMPACT 60" [152cm] WIDE TRAILER. Excellent for tight roads, streets, storage, and maneuverability. Torsion axle suspension, 15" [38.1cm] tires, heavy-duty fenders. 2" ball coupler. Spare tire option available ADJUSTABLE JACK (Towable models only) Roller wheel with 850 lb. [372kg] Rating. Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle. LIGHTING (12-VOLT SYSTEM) Light package, including rubber mounted taillights and license plate holder. Lighted hour meter and fuel gauge standard. ALERT SYSTEMS (ADJUSTABLE): Factory set at 15 hours for blades, 100 hours for oil changes. Blade hour maintenance code alerts time to check the blades for sharpening. Service alert reminds owner of time to change the oil. DIMENSIONS: • Length 142" [361cm]. • Width 60" [153cm] • Height 93" [236cm. Weight • 670cc Honda chipper – 2100 lbs. [954kg] • 1.1 Liter Diesel Kubota chipper – 2305 lbs. [1045kg] • 993cc Briggs & Stratton chipper - 2140 lbs. [972kg] SAFETY • Safety chains standard • Meets all applicable ISO safety standards. Find a dealer near you! Call us at 800.247.7335 or Log onto 237 12th St. NW • P.O. Box 849, West Fargo, ND 58078 Email: sales@b...
Эта инструкция также подходит к моделям:Измельчители садовые - CH611DH (76628) (302.32 kb)
Измельчители садовые - CH6993H (76635) (302.32 kb)