Оценок - 3, средний балл: 3.7 ( )

Производитель: 3Com Размер: 275.5 kb Название файла: 3600.pdf Язык инструкции:

Do Not Substitute Parts or Modify Instrument Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized modification to the instrument. Return the instrument to a qualified dealer for service and repair to ensure that safety features are maintained. II. Connecting the power line 1. Inspect the power selection switch on the back panel, to assure if the selected voltage is the same as environment power voltage. If not, please refer to the notice around the power plug. 2. Before connecting the power supply, please be sure that the switch on the front panel should be in the off position. 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL 3. Connect the power cable to the AC in the power supply and the 3 connector plug. Please be sure that the power supply is grounded. 4. Press the switch on the front panel to switch on the instrument and you can start to use it. III.Fuse 1. The fuse is at the position of power input part on the back panel, for the purpose of avoiding failure brought by using wrong voltage. Please pay attention to the following items when you change the voltage input and the fuse. 2. Before changing the voltage and fuse, please be sure that the AC power is switching off, and be sure that there is no other equipment connected to this instrument. 3. Put a screwdriver into the fuse mounting, press it and the fuse mounting will pop up. 4. Pull out the fuse, change it according to the label beside the power input plug. Warning: To avoid damaging the instrument, please be sure to change a suitable type fuse. IV. Power supply 1. For safety reasons, please be sure not to have any short circuit between plus and minus pole. 2. Output wire should be insulated completely to the connected equipment. 3. Before using the instrument, you should switch on the power supply for 30 minutes. 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL Chapter 1 General Introduction 1.1 General Introduction The ARRAY 3600 Series Power Supply is a compact programmable DC power supply. It is equipped with back-light LCD display, number keypad and rotary knob which make it much easier to use. It can be operated at constant voltage mode or constant current mode. Programming feafures include over-current protection, maximum output voltage and power limitation, and 10 parameters storage. It is an essential instrument for scientific research, education, service and so on institutions. 1.2 Specification Model 3644A 3645A 3646A Number of outputs 1 1 1 DC outputs Voltage 0 to 18V 0 to 36V 0 to 72V Current 5A 3A 1.5A Power(max) 90W 108W 108W Line Regulation Voltage 0-3.999V: 0.01% + 3mV 4-18V: 0.02% + 10mV 0-3.999V: 0.01% + 3mV 4-36V: 0.02% + 10mV 0-3.999V: 0.01% + 3mV4-72V: 0.02% + 10mV Current 0.02% + 8mA 0.02% + 8mA 0.02% + 8mA Load Regulation Voltage 0.02% + 20mV 0.02% + 10mV 0.02% + 10mV Current 0.02% + 15mA 0.02% + 10mA 0.02% + 8mA Ripple and noise Voltage <1mVrms <1mVrms <1mVrms Current <5mArms <4mArms <3mArms Programming accuracy at 25 C+/- 5 C Voltage Current 0.1% + 20mV 0.2% + 20mA0.1% + 20mV 0.2% + 20mA 0.1% + 20mV 0.2% + 20mA Readback accuracy at 25 C +/- 5 C Voltage 0.2% + 20mV 0-19.999V: 0.2% + 20mV 0-19.999V: 0.2% + 20mV 20-36V: 0.2% + 100mV 20-72V: 0.2% + 100mV Current 0.2% + 20mA 0.2% + 20mA 0.2% + 20mA Program resolution Voltage 0-3.999V: 1mV4-18V: 10mV 0-3.999V: 1mV 4-36V: 10mV 0-3.999V: 1mV 4-72V: 10mV Current 1mA 1mA 1mA Readback resolution Voltage 10mV 0-19.999V: 10mV 0-19.999V: 10mV 20-36V: 100mV 20-72V: 100mV 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL Current 10mA 10mA 10mA Protection Over voltage / Over current / Over power AC Input 110V/220Vac +/- 15%, 47 to 63 Hz Operating environment 0 to 50 C, 80% RH * Weight 6.00kg Dimensions 212.6mmW x 88.1mmH x 250mmD Software PowerMS Power Management System software, ActiveX and DLL tools support VB, VC++, DELPHI, LABVIEW Standard Accessories User’s manual, AC cable, handlebars, software CD Optional Accessories RS232 adaptor, RS485 adaptor, USB adaptor, Mounting rack * 0 to 35 C for full rated output. At higher temperaturers, the output current is derated 3% per C. 1.3 Features 1. LCD display with back light. 2. Number keypad and rotary knob. 3. Maximum output voltage limitation. 4. Maximum output power limitation. 5. 10 parameters storage. 6. Can be series / parallel connected to expand output voltage/ current. 7. Free power management software. 1.4 Dimensions and Structure 1.4.1 Dimension Fig 1 Dimension of 3600 Series Programmable DC power supply 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL 1.4.2 Structure 1.4.2.1 Front view Front panel is for users to operate. Please see the right picture for details. 1. LCD Display 2. Number Keypad 3. Rotary knob 4. Output Terminal Fig 2 Front view of 3600 Series DC power supply 1. LCD display The Left-upper Corner: The set voltage value. (Flash...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: