Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
(Not Shown). Small Tab Upper Cane Handle Camlock Assembly Large Notch UNLOCK LOCK Cam Lever NOTE: Raise Cam Lever before installing Camlock Assembly Reassembling the Quad Cane NOTE: For this procedure, refer to FIGURE 2. 1. Raise cam lever before installing upper cane handle onto base. 2. Re-install cane handle with new camlock assembly onto cane base. 3. Push cam lever down. NOTE: This will engage the large tab on bottom rear of cam lever into large notch on rear of cane handle. 4. Test cane to ensure that cane and camlock assembly are properly secured, i.e., no rattle or looseness of the cane base and upper cane handle. Upper Cane Handle Camlock Assembly NOTE: Push Cam Lever down after re-installing upper cane handle to base. FIGURE 2 Reassembling the Quad Cane Invacare Corporation USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Can, Cam cane Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 Invacare, Yes, you can. and the Medallion Design are registered trademarks of Invacare Corporation. ©2006 Invacare Corporation Part No 1055947 Rev B - 10/12/06...
Эта инструкция также подходит к моделям:Инвалидные коляски - 1048085 (199.34 kb)
Инвалидные коляски - 1048086 (199.34 kb)
Инвалидные коляски - 1055948 (199.34 kb)