Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
• Replace the battery compartment door and tighten the screw. • If this product begins to operate erratically, you may need to reset the electronics. Slide the power/ volume switch on the mobile base off and then back on. Remove the batteries from the remote and replace them. • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only). 4 Assembly 11 Crib Adaptor Base • Fit the crib adaptor to the base and tighten the screws. IMPORTANT! Make sure the straps are over the top of the crib adaptor. 12 Canopy Arm • First, fit the top retainer piece onto the end of the arm. • Next, fit the canopy onto top retainer piece. • Then, fit the bottom retainer piece onto the canopy and tighten the screw. 5 Assembly 13 • Fit the arm into the socket in the base and tighten the screws. .Band then slide the socket door open 14• First, press the button on the mobile base, next to the socket A A PRESS SLIDESLIDE Arm B Socket Base Soft Toy • Fit the string on a soft toy through the slot in the canopy. Pull down gently on the soft toy to secure the string in the large leaf spoke. • Repeat this procedure to attach the remaining soft toys to the canopy. Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. N8849pr-0920 ©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA 6 Crib Attachment 11 Crib Top Rail Base BucklesBuckles • Position the base so that the decorated side faces the inside of the crib. • Fit the base onto the crib top rail. • Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through the crib rails. • Buckle the straps. Make sure you hear a “click”. • Make sure the straps are tightened securely around the crib rail. • While pushing the tab at the bottom of the buckle, pull the free end of the strap to tighten on the rail. Hint: You can secure the free end of the strap to the base. • To loosen the strap for removal, simply pull the buckle down. 12 Crib Attachment 13 • Tie the base strings to a crib spindle. Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied. 14MattressMattress At Least 7 InchesAt Least 7 InchesBottom of BaseBottom of Base • If the distance between the base and the mattress is less than 7 inches, lower the crib mattress. 8 Use IMPORTANT! • In the unlikely event that use of the remote interferes with normal use of other remote controlled equipment, such as televisions, stereos, or use of other electronic or battery powered appliances interfere with operation of the mobile, do not use both appliances at the same time. • For best performance between the mobile and the remote, avoid using the remote in areas of bright light. In bright natural or artificial light, you may notice loss of range. Move the mobile or otherwise reduce the amount of light to improve performance. RemoteRemote • When using the remote, make sure that the arrow on the mobile base is pointing towards the transmitter window on the remote. For best results make sure the path between the transmitter window on the remote and the mobile base are in a direct line and free of obstacles. Position the mobile base so that the arrow points to the area from which you’re most likely to use the remote. For example, if you’ll most often be using the remote from the doorway of the nursery, make sure the arrow on the mobile base is pointing towards the doorway and the path between the mobile base and doorway is free from obstructions. 9 Use Power/Volume SwitchPower/Volume Switch • Slide the switch to on with low volume or on with high volume . When finished using the product, slide the switch off . Projector/Sound SwitchProjector/Sound Switch Slide the switch to: -turns on sounds, mobile and projector -turns on sounds and mobile -turns on sounds only Music or Sound Select ButtonsMusic or Sound Select Buttons Press a music or sound button on the front of the mobile base: -for Bach, Beethoven and Mozart - for nature sounds - for heartbeat sounds 10 Convert to Music Box Remove the mobile and use as a music box with a projection show! 11 • Loosen both screws in the arm near the mobile base. Lift and remove the arm. • Close the socket door on top of the mobile base. IMPORTANT! The socket door must be closed for sound and projection operation. If sounds or lights are not working, make sure the door is completely closed. • Store the mobile in a safe place for future use. Consumer Information ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NMB-003 Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. L’utilisation de ce dispositif e...