Оценок - 4, средний балл: 4.5 ( )

Производитель: Garmin Размер: 4.88 mb Название файла: Язык инструкции:

Фото и характеристики  Garmin  GPSMAP 7012

Insert a memory card into the SD card slot on the chartplotter. 2. From the Home screen, select Information > User Data > Data transfer > Card > Save to Card. 3. Indicate the name of the new file: • Select a file name from the list. • Select Add New File to create a new file. Enter the file name. Select Done. 4. Select Save to Card. The file name is saved with a .ADM extension. Copying Built-in Maps to a Memory Card You can copy maps from the chartplotter to a memory card for use with HomePort. 1. Insert a memory card into the SD card slot on the chartplotter. 2. From the Home screen, select Information > User Data > Data transfer > Card. 3. Select Copy Built-In Map to copy the maps loaded onto your chartplotter to the memory card. Copying Waypoints, Routes, and Tracks to or from all Chartplotters on a Network You can transfer waypoint, route, and track information from one chartplotter connected to the Garmin Marine Network to every other chartplotter connected to the network. 1. Connect the chartplotter to a Garmin Marine Network using the network port on the back of the chartplotter and a Garmin network cable. 2. From the Home screen, select Information > User Data > Data transfer > Network. 3. Complete an action: • Select Clone User Data to transfer data from the chartplotter to the other chartplotters connected to the network. Existing data is overwritten on those chartplotters. • Select Merge User Data to transfer data between all the chartplotters connected to the network. Unique data is combined with existing data on every chartplotter. 70 GPSMAP® 6000/7000 Series Owner’s Manual Device Configuration Backing Up Data to a Computer 1. Insert a memory card into the SD card slot on the chartplotter. 2. From the Home screen, select Information > User Data > Data transfer > Card > Save to Card. 3. Complete one of the following actions to indicate the name of the file to be backed up: • Select a file name from the list. • Select Add New File to create a new file. Enter the file name. Select Done. 4. Select Save to Card. The file name is saved with an .ADM extension. 5. Remove the memory card from the chartplotter and insert it into an SD card reader attached to a computer. 6. From Windows® Explorer, open the Garmin\UserData folder on the memory card. 7. Copy the backup file on the card and paste it to any location on the computer. Restoring Backup Data to a Chartplotter 1. Insert a memory card into an SD card reader that is attached to the computer. 2. Copy a backup file from the computer to the memory card, into a folder named Garmin\UserData. 3. Insert the memory card into the SD card slot on the chartplotter. 4. From the Home screen, select Information > User Data > Data transfer > Card > Replace From Card. Networked Device Configuration Viewing Connected Garmin Marine Network Devices From the Home screen, select Configure > Communications > Marine Network. Each connected device is listed along the left side of the screen. Assigning a Name to a Garmin Marine Network Device 1. From the Home screen, select Configure > Communications > Marine Network. 2. Select a device. 3. Select Review. 4. Enter a name for the device: • For the GPSMAP 6000 series, use the Rocker. • For the GPSMAP 7000 series, use the on-screen keyboard. 5. Select Done. GPSMAP® 6000/7000 Series Owner’s Manual 7 Radar Radar . WARNING The marine radar transmits microwave energy that has the potential to be harmful to humans and animals. Before beginning radar transmission, verify that the area around the radar is clear. The radar transmits a beam approximately 12° above and below a line extending horizontally from the center of the radar. Avoid looking directly at the radar, because the eyes are the most susceptible parts of the body. When you connect your chartplotter to an optional Garmin marine radar such as a GMR™ 404/406 or a GMR 18/24, you can view more information about your surroundings. The radar connects through the Garmin Marine Network and shares radar data with all networked chartplotters. The GMR transmits a narrow beam of microwave energy as it rotates in a 360° pattern. When the transmitted energy contacts a target, some of that energy is reflected back to the radar. Transmitting Radar Signals 1. Turn on the network. The radar warms up and a countdown is provided to alert you when the radar is ready. Note: As a safety feature, the radar enters standby mode after it warms up. This gives you an opportunity to verify that the area around the radar is clear before beginning radar transmission. 2. From the Home screen, select Radar. 3. Select Cruising, Harbor, offshore, Dual Range, or Sentry. A countdown message appears while the radar is starting up, and the “Ready to Transmit” message appears. 4. Select Menu > transmit Radar. A “Spinning Up” message appears for a few moments, and the radar begins painting an image. Stopping the Transmission of Radar Signals From the Radar screen, select Menu > Radar to Standby. Adjusting the Zoo...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: