Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Garmin, модель GPSMAP 6012

Производитель: Garmin
Размер: 4.88 mb
Название файла:
Язык инструкции:en
Фото и характеристики  Garmin  GPSMAP 6012
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Detailed Road and POI Data BlueChart g2 Vision contains detailed road and POI data, which includes highly detailed coastal roads and points of interest (POIs) such as restaurants, lodging, local attractions, and more. Searching for and Navigating to POIs See “Where To?” (page 42). Auto Guidance Auto Guidance automatically creates and suggests the best path to a destination, based on available BlueChart g2 Vision chart information. Auto Guidance is available when you navigate to a destination using Guide To (page 33). Configuring Auto Guidance Settings See “Auto Guidance Line Configurations” (page 59). GPSMAP® 6000/7000 Series Owner’s Manual 7 Combinations Combinations About the Combinations Screen The Combinations screen shows a combination of different screens at the same time. The number of options available on the Combinations screen depends on the optional network devices you have connected to your chartplotter, and whether you are using an optional BlueChart g2 Vision data card. You can combine up to three screens in the GPSMAP 6000 series and up to four screens in the GPSMAP 7000 series. After you select a combination, you can customize it. Switch focus screen (6000 series only) Focus screen Data fields Combinations Screen Configuration Selecting a Combination 1. From the Home screen, select Combinations. 2. Select a combination. Customizing the Combinations Screen Note: You can choose from only the options available to your chartplotter. To increase the number of screens available, use a BlueChart g2 Vision data card or add network devices such as sonar and radar. 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select Menu > Change Combination. 4. Complete an action: • Select Functions to select the number of combination screens. Select a number. • Select Layout > Vert. to arrange the screens in a vertical layout. • Select Layout > Horiz. to arrange the screens in a horizontal layout. • Select Data Bar > on to show the horizontal bar that contains the data fields. • Select a numbered option, such as 1. Nav Chart or 2. Sonar in the image below, to change the type of information shown in the corresponding screen. GPSMAP® 6000/7000 Series Owner’s Manual Combinations Combination screen Combination screen Data bar 5. Select Done. Adding a Data Field The Combinations screen can display up to six data fields in the GPSMAP 6000 series, and up to eight data fields in the GPSMAP 7000 series. 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select an unused data field. 4. Select the type of data shown in the field. Available data options vary, based on the chartplotter and network configuration. Unused data field Removing a Data Field 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select a data field that contains data. 4. Select None. GPSMAP® 6000/7000 Series Owner’s Manual Combinations Editing a Data Field 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select a data field. 4. Select the type of data shown in the field. Available data options vary based on the chartplotter and network configuration. Viewing Instrumentation Data You can view engine gauges or fuel gauges in a combinations screen. 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select Menu > Change Combination. 4. Select a numbered option. 5. Complete an action to show gauges in a combinations screen: • Select Instrumentation > engine > Done to show engine gauges. • Select Instrumentation > Fuel > Done to show fuel gauges. Cycling Through Instrumentation Screens 1. From the Home screen, select Combinations. 2. Select a combination that contains a screen with instrumentation data. 3. Complete an action: • For the GPSMAP 6000 series, select the icon in the lower-right corner that represents the gauge screen you want to cycle through. • For the GPSMAP 7000 series, select the left and right arrows beneath the gauge. The chartplotter displays the next fuel gauge screen or engine gauge screen. 4. Repeat step 3 to cycle through all the gauge screens. Customizing Instrumentation Data See “Engine Gauges” (page 51) or “Fuel Gauges” (page 53). Focusing on a Screen The largest screen in a combinations screen is called the focus screen. In the GPSMAP 6000 series, you can switch the content that appears in the focus screen. 1. From the Home screen, select Combinations. 2. Select a combination. 3. Select the icon in the lower-right corner that represents the screen you want to view in the focus screen. 0 GPSMAP® 6000/7000 Series Owner’s Manual Combinations Using Full-screen View You can view the content of any combination screen on the full chartplotter screen. Note: For the GPSMAP 6000 series, the combination screen must be in the focus screen before it can be viewed on the full chartplotter screen. 1. From the Home screen, select Combinations. 2. Select a combination. 3. For the GPSMAP 6000 series, ensure that the combination scre...

Эта инструкция также подходит к моделям:
GPS навигаторы и приемники - GPSMAP 190-01120-00 (4.88 mb)
GPS навигаторы и приемники - GPSMAP 6008 (4.88 mb)
GPS навигаторы и приемники - GPSMAP 6208 (4.88 mb)
GPS навигаторы и приемники - GPSMAP 6212 (4.88 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории