Оценок - 3, средний балл: 4.3 ( )

Производитель: Garmin Размер: 7.54 mb Название файла: Язык инструкции:

36 GPSMAP 700 Series Owner’s Manual Almanac, On-boat, and Environmental Data Current Information NoTe: Current station information is available with a BlueChart g2 Vision card. The Currents screen shows information about a current station . for a specific date and time, including the current speed and level .. By default, the chartplotter shows current information for the most-recently viewed current station and for the present date and time. From the Home screen, select Information > Currents. . . Current Station Information Viewing Information about a Nearby Current Station NoTe: Current station information is available with a BlueChart g2 Vision card. 1. From the Home screen, select Information > Currents > Nearby Stations. 2. Select a station. Configuring Current Station Information You can indicate the date of current station information to be viewed, and you can view the information in a chart or in a report format. NoTe: Current station information is available with a BlueChart g2 Vision card. 1. From the Home screen, select Information > Currents > Nearby Stations. 2. Select a station. 3. Complete an action: • Select Change Date > Manual to view tide information for a different date, enter a date, and select Done. • Select Show Report to view the Current Report for the selected station. The report includes slack water, flood, and ebb levels. • Select Next Day to view current information for the day after the date shown. • Select Previous Day to view current information for the day before the date shown. • Select or to change the time in 4- to 5-minute intervals. GPSMAP 700 Series Owner’s Manual 37 Almanac, On-boat, and Environmental Data Celestial Information The Celestial screen shows information about sunrise, sunset, moonrise, moonset, the moon phase, and the approximate sky view location of the sun . and moon .. By default, the chartplotter shows celestial information for the present date and time. The center of the screen . represents the sky overhead, and the outermost rings . represent the horizon. From the Home screen, select Information > Celestial. . . . . Celestial Information Viewing Celestial Information for a Different Date You can select a date and time for which to view celestial information, and you can view the moon phase for the selected date and time. 1. From the Home screen, select Information > Celestial. 2. Complete an action: • Select Change Date > Manual to view information for a different date. Enter a date. Select Done. • Select Show Moon Phase to view the moon phase at the specified date and time. • Select or to change the time in 1-hour intervals. Viewing Tide, Current, and Celestial Information from the Navigation Chart. 1. From the Home screen, select Charts > Navigation Chart. 2. Select an area near a tide, current, or celestial information station. 3. Select Information. 4. Select Tides, Currents, or Celestial. On-boat Data Engine and Fuel Gauges Viewing Engine Gauges You must be connected to a NMEA 2000 network capable of sensing engine data to view engine gauges. See the GPSMAP 700 Series Installation Instructions for details. From the Home screen, select Information > Dashboard Gauges > engine. Cycling Through Engine Gauge and Fuel Gauge Screens 1. From the Home screen, select Information > Dashboard Gauges > engine. 2. Select the left and right arrows to move from one gauge screen to the next. 3. Repeat step 2 to cycle through all the engine gauge and fuel gauge screens. Customizing Engine Gauge and Fuel Gauge Limits To establish the upper and lower limits of a gauge, and the range of desired standard operation, you can configure up to four values for the engine gauge or the fuel gauge. When a value exceeds the range of standard operation, the gauge face or bar becomes red. 38 GPSMAP 700 Series Owner’s Manual Almanac, On-boat, and Environmental Data Setting Description Scale minimum This value is less than the rated minimum, and it represents the lower limit of the gauge. This setting is not available on all gauges. Scale maximum This value is greater than the rated maximum, and it represents the upper limit of the gauge. This setting is not available on all gauges. Rated minimum Represents the minimum value of the standard operating range. Rated maximum Represents the maximum value of the standard operating range. 1. From the Home screen, select Information > Dashboard Gauges > engine > Menu > Gauge Setup > Set Gauge Limits. 2. Select a gauge. 3. Select Gauge Limits > Custom > edit Limits. 4. Select the gauge limit you want to set (Scale Min, Scale Max, Rated Min, or Rated Max). NoTe: Some of these options may not be available for all gauges. 5. Select the gauge limit. 6. Repeat steps 4 and 5 to set additional gauge limits. Activating Status Alarms for Engine Gauges and Fuel Gauges If you have activated gauge status alarms, when the engine sends a warning status message over the NMEA 2000 network, a gauge status alarm message appears. The gauge face or bar may b...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: