|
Фрагмент инструкции
DO NOT PLACE COOKING UTENSILS ON TOP OF THE HEATER. PLUG ELECTRICAL CORD INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. CONTENTS WARNINGS .......................................................................... 2 HEATER SPECIFICATIONS ................................................. 3 OPERATING PRECAUTIONS .............................................. 3 SAFETY PRECAUTIONS ..................................................... 3 OPERATING INSTRUCTIONS ............................................. 4 MAINTENANCE, STORAGE AND SERVICE....................... 5 WIRING DIAGRAM............................................................... 6 PARTS LIST .......................................................................... 6 EXPLODED VIEW ................................................................ 7 WARRANTY ......................................................................... 8 INSTRUCTIONS FOR ORDERING PARTS ......................... 8 50K & 75KT WARNING: Not suitable for use on wood floors or other combustible materials. When used the heater should rest on a suitable insulating material at least 1 inch thick and extending 3 feet or more beyond the heater in all directions. Enerco Group, Inc. | Kerosene Forced Air Heater 2 Operating Instructions and Owner’s Manual SPECIFICATIONS SPECIFICATIONS Model 50K 75KT 125KT 175KT 210KT Burn Rate: 50,000 Btu/hr (22 kW) 75,000 Btu/hr (22 kW) 125,000 Btu/hr (37 kW) 175,000 Btu/hr (51 kW) 210,000 Btu/hr (61.5 kW) Fuel Rate: 0.37 gal/hr (1.4 L/hr) 0.55 gal/hr (2.1 L/hr) 0.96 gal./hr (3.5 L/hr) 1.3 gal/hr (5.0 L/hr) 1.6 gal/hr (6.0 L/hr) Electrical Input: 115V, 60Hz, 3.5a 115V, 60Hz, 4a 115V, 60Hz, 5.5a 115V, 60Hz, 5.5a 115V, 60Hz, 5.5a Line Protection: 10 amps 10 amps 20 amps 20 amps 20 amps Min. Operating Voltage: 110V 110V 110V 110V 110V Pressure Setting: 3.5 psig (24 kPa) 4.2 psig (29 kPa) 5.0 psig (34 kPa) 5.8 psig (40 kPa) 8.5 psig (58.6 kPa) Max. Outlet Temperature: 1300oF (704oC) 1300oF (704oC) 1300oF (704oC) 1300oF (704oC) 1300oF (704oC) Fuel Tank Capacity: 4 gallons (15.1 L) 6 gallons (22.7 L) 14 gallons (53 L) 14 gallons (53 L) 14 gallons (53 L) Ignition: Direct Spark, Continuous Direct Spark, Continuous Direct Spark, Continuous Direct Spark, Continuous Direct Spark, Continuous Spark Generator: Igniter 13 kV, 10ma Igniter 13 kV, 10ma Igniter 13 kV, 10ma Igniter 13 kV, 10ma Igniter 13 kV, 10ma Primary Safety Control: Solid State Control Solid State Control Solid State Control Solid State Control Solid State Control Certification: OPERATING PRECAUTIONS This is a kerosene, direct-fired, forced air heater. It's intended use is primarily temporary heating of buildings under construction, alteration or repair. Direct-Fired means that all of the combustion products enter the heated space. Even though this heater operates very close to 100 percent combustion efficiency, it still produces small amounts of carbon monoxide. Carbon monoxide (called CO) is toxic. We can tolerate small amounts but not a l...
Эта инструкция также подходит к моделям:Газовые нагреватели - MH175KT (433.11 kb)
Газовые нагреватели - MH125KT (433.11 kb)
Газовые нагреватели - MH210KT (433.11 kb)
Газовые нагреватели - MH50KT (433.11 kb)