Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Ferris Industries, модель Derby ZT2354

Производитель: Ferris Industries
Размер: 82.56 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


See Figure 4 for the proper hose locations. Secure with the enclosed hose clamps. 18. Install the tie wraps as shown in Figures 4-6. Use a long tie wrap to secure the 48” hoses to the 5/8” supply hose. Position the hoses so the do not contact the battery pan. Use the remaining two long tie wraps the bundle the hoses together in front of the engine. Be sure the tie wrap the hoses to the engine screen. Use the short tie wrap to secure the 25” hose to the engine oil dipstick tube. Do not overtighten the tie wraps or collapsing the hose may result. Figure 3. Left Return Hose Routing Figure 4. Hose Routing Tie Wrap Figure 5. Tie Wrap Location © Copyright 2000 Ferris Industries. All Rights Reserved. 2 Installation Instructions 1846197 19. Refill the oil reservoir to the “MAX OIL LEVEL HOT” line. Use either Mobil 1, 15W-50 synthetic oil or Castrol Syntec 5W-50 oil. DO NOT use conventional oils. Make sure area around the reservoir is free of dust, dirt, or other debris. 20. Reinstall the left drive tire and remove the jack stands. Lower the seat plate. 21. Make sure the parking brake is engaged, the control handles locked in the “NEUTRAL” position and the PTO switch is off. Reconnect the spark plug wires. 22. Start the engine and run it in the slowest throttle position. Dismount the machine and raise the seat plate. 23. Carefully watch the oil level in the reservoir while the machine in running. The level will initially drop quickly as the oil coolers are being filled. Do not allow the oil level to drop below 50% of the full capacity. 24. With the cap removed, look through the filler neck of the oil reservoir and watch for oil flow at the return line barbs. Once there is a continuously flow of oil, the return side of the hydraulic system has been filled. If necessary, fill the oil reservoir to 1/2” below the “MAX OIL LEVEL HOT” line. 25. Replace the oil reservoir cap and lower the seat plate. Figure 6. Tie Wrap Location © Copyright 2000 Ferris Industries. All Rights Reserved. 3 ...

Эта инструкция также подходит к моделям:
Газонокосилки - 1846197 (82.56 kb)
Газонокосилки - Derby 1846197 (82.56 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории