Оценок - 2, средний балл: 4 ( )

Производитель: Electrolux Размер: 817.47 kb Название файла: Язык инструкции:

ENGLISH - 4 USE STARTING AND STOPPING BLADE, BRAKE, CLUTCH (BBC) If you have a BBC model you will be able to keep the engine running while the brake is on. Forward drive is engaged and disengaged with the Power Drive lever at the top of the handle (Q2-B). 1. Connect the spark plug lead. 2. If fitted move the throttle control to the FAST position. 3. Pull the recoil starter fully towards you until you feel the full resistance, return the handle slowly then pull the handle firmly towards you to its full extent. 4. After the engine has started, allow to run for 30 seconds before commencing to use. 5. Pull the BBC arm to the handle (Q1). 6. While holding the BBC arm, push forward BBC control lever until a click is heard (Q2-A). HOW TO MOW 7. Release the BBC control lever which will return to its original position. 8. Releasing the BBC arm will stop the blade from rotating. Please note: Leaving the engine running without the blade rotating for an extended length of time could lead to the engine overheating. To stop the lawnmower - release the powerdrive lever then the BBC arm. Move throttle control to stop position. Please Note:Do not overload your Lawnmower When mowing in long thick grass a first cut with the cutting height adjusted to its highest setting, see Cutting Height, will help reduce motor overload and will help prevent damage to your lawnmower. 1. Start mowing from the outside edge of the lawn, 2. Mow twice a week in the growing season, mowing in strips in alternate directions (R). your lawn will suffer if more that one third of its length is cut at one time and this may also result in poor collection. POWERDRIVE CABLE Ensure the Powerdrive cable is not twisted and runs freely down the handles. 1. If the drive does not engage when the 2. Screw adjuster in opposite direction if the powerdrive lever is pulled towards the handle powerdrive does not disengage with the screw adjuster anti-clockwise (S). powerdrive lever free (S). ADJUSTMENT CUTTING HEIGHT (WITHOUT LEVERS) If your lawnmower has wheel hubs as illustrated in T1, the height of cut is adjusted by following steps T1- T3. CUTTING HEIGHT (WITH LEVERS) 1. Remove the wheel by turning the wheel hub in an anticlockwise direction (T1) and relocate in new hole (T2) turning the wheel hub in a clockwise direction to tighten (T3). Repeat for other wheels adjusting to the same position. Please Note : Your petrol wheeled rotary may be fitted with a mixture of cutting heights. Levers Fitted, Lowest Cut Height -(V1) Levers Fitted, Highest Cut Height -(V2) 1. If you have Height of Cut levers (Figs. V), the height of cut is altered by pulling the adjustment lever away from the location slots and moving to the selected position. Levers Fitted, Semi Central -(V3) Levers Fitted, Central -(V4) 2. If your petrol wheeled rotary is fitted with more than one lever then these must be adjusted to the same position (Figs V). ENGLISH - 5 MAINTENANCE CLEANING IMPORTANT Never use water for cleaning your lawnmower. Do not clean with chemical, including petrol, or solvents - some can destroy critical plastic parts. • Disconnect spark plug and allow engine 2. Using a soft brush - remove grass clippings exhaust to cool. from all air intakes, the discharge chute and • Turn machine on its side with the exhaust the grass box (W2). uppermost. 3. Wipe over the surface of your lawnmower with 1. Remove grass from under the deck with a a dry cloth. brush (W1). CUTTING SYSTEM Always handle the blade with care - sharp ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: