Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
iMPORTANT: Be sure to re-attach the heat shield after bumper is installed. Catt 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE SHOWN FULL SiZE PARTS BAG "B" EXCEPT WHERE NOTED (parts bag "A") E J D (parts bag "A") (parts bag "A") (parts bag "A") FIGURE 2 REF PART NO. QT_ DESCRiPTiON A 48894 2 SelfThreadingScrew,3/8-16x 1-1/2" B 43062 2 Hex Bolt, 3/8-16 x 1-1/2" C 43001 2 Hex Bolt, 3/8-16 x 1" D 48866 2 Pivot Spacer E 1643-60 2 Plastic Grip F 43003 4 Lock Washer, 3/8" G 43070 4 Washer, 3/8" H 44742 4 Plug (LT) LAWN TRACTOR ......... -----1 MUFFLER HEAT SHIELD ) N FIGURE 3 5 STEP 3: (SEE FIGURE 4) • Place plug (H) on a work bench or solid table and push end of bumper down onto plug. Repeat for all four plugs. BUMPER PUSH DOWN WITH EVEN PRESSURE WORK BENCH OR SOLID TABLE _/PLUG (H) FIGURE 4 STEP 4: (SEE FIGURE 5) IMPORTANT: Do not remove any bolts from the tractor frame while the mower deck is raised. Misalignment of holes in frame could result. (LT) LAWN REMOVE BOLT IF PRESENT TRACTOR Lower mower deck to rest on ground. Remove bolts from mounting holes on both sides of tractor frame. Use a mounting bracket to help identify holes. SUSPENSION BRACKET (LT) LAWN TRACTOR REMOVE BOLT IF PRESENT \ // J SUSPENSION BRACKET (GT) GARDEN TRACTOR REMOVE BOLT IF PRESENT / SUSPENSION BRACKET FIGURE 5 6 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE STEP 5: (SEE FIGURE 6) (GT) FRAME SHOWN • Attach left mounting bracket to hole shown in ]eft LEFT MOUNTING FLAT side of tractor frame using bolt (C), lock washer (F) BRACKET WASHER BOLT and flat washer (G). Align middle hole in bracket (G) (C) with empty hole in tractor frame and tighten bolt (C) ATTACH TO to hold bracket in place. Repeat for right mounting LOCK THiS HOLE bracket. WASHER (F) BUMPER STOPS FACE OUT ALIGN THESE HOLES LEFT SiDE ViEW FIGURE 6 PIVOT STEP 6: (SEE FIGURES 7 & 8) SPACER • Assemble plastic grips (E) onto locking levers. (D) To attach bumper to tractor: 1. Place flattened ends of bumper onto mounting brackets. Insert pin of locking lever through front hole in bumper and into front hole in mounting bracket to support bumper on mounting bracket. 2. Insert pivot spacers (D) into rear holes in bumper. GRiP (E) LEFT SIDE VIEW FIGURE 7 , Fasten locking lever and bumper to mounting bracket FLAT using a screw (A) or bolt (B), a lock washer (F) and a WASHER(G) flat washer (G). Use screw (A) for LT tractors and bolt (B) for GT tractors. Assemble screw or bolt through pivot spacer in rear hole in bumper and into tractor frame. Tighten. Repeat for other side. BOLT (B) NOTE: If hole in (LT) tractor frame is not threaded, push in while turning screw (A) to create threads in hole. IMPORTANT: You must lower bumper before raising tractor hood. Pull out on locking levers and push bumper down as far as it will go. LEFT SIDE VIEW FIGURE 8 Catt 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE Your Home For repair -in your home -of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Cana...
Эта инструкция также подходит к моделям:Газонокосилки - 486.246213 (609.13 kb)
Газонокосилки - 486.246222 (609.13 kb)