Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
180 min. Approx. 3600 images Shooting (movies) Approx. 60 min. — Notes • The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. • The number of images that can be recorded is for shooting under the following conditions: – Using Sony microSD memory card (Class 4 or faster) (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). – [Disp. Resolution] is set to [Standard]. • The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Panel Brightness] is set to [3(Normal)]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVC HD HQ – When continuous shooting ends because of set limits (page 24), touch (Movie button) again and continue shooting. Shooting functions such as the zoom do not operate. x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) for shooting to supply power when shooting. GB Notes Notes Power cannot be supplied when the battery pack is not inserted in the camera. • When the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor AC-UB10/UB10B, power supply is available only in playback mode. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. • If you connect the camera and a computer using the multi-use terminal USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Touch (Playback) to switch to the playback screen. Inserting a memory card (sold separately) “Memory Stick Micro” media (M2) microSD memory card Make sure that the correct side is facing up. Terminal Printing surface 1 Open the cover. 2 Insert the memory card (sold separately). • With the camera lens facing upward, as illustrated, insert the memory card straight in until it clicks into place. • Pushing down on the microSD memory card (in the direction of the battery insertion slot) while inserting it may damage the camera. • Be careful when removing the microSD memory card, as it may pop out quickly. GB 3 Close the cover. 4 4 • A: The memory card is inserted correctly. • B: The memory card is not inserted correctly. Confirm the direction of the memory card and reinsert it straight into the camera. • Only one memory card can be inserted. GB x Memory cards that can be used Memory card For still images For movies A Memory Stick Micro a — Memory Stick Micro (Mark2) a a B microSD memory card a a (Class 4 or faster) microSDHC memory card a a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Micro” media, and products in B are collectively referred to as microSD memory card. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock ON/OFF (Power) Setting the clock ON/OFF (Power) button Lens cover 1 Lower the lens cover. The camera is turned on. The power lamp lights up green only when the camera starts up. Date & Time setting is displayed when you turn on the camera for the first time. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select a desired geographic location by following the on-screen instructions, then touch [Next]. 4 Set [Daylight Savings] or [Summer Time], [Date & Time Format] and [Date & Time], then touch [Next]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Touch [OK]. 6 Follow the instructions on the screen. • If you set [Disp. Resolution] to [High], the battery charge may be depleted faster. GB Shooting still images/movies Shutter button Shooting still images/movies Shutter button Shooting still images 1 Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights. 2 Press the shutter button fully down to shoot an image. Shoo...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-TX77 (17.8 mb)