Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Basic Playback Operation Use the following procedure to scroll through recorded images stored in the camera’s memory. 1. Align the POWER/Function Switch with PLAY. PLAY: PLAY mode for playing back images 2. Use [] and [] to scroll through the images on the monitor screen. [] [] [] [] NOTES • Holding down [] or [] scrolls images at high speed. • In order to allow for faster playback image scrolling, the image that initially appears on the monitor screen is a preview image, which is of somewhat lower quality than the actual display image. The actual display image appears about three seconds after the preview image. This does not apply to images copied from another digital camera. To do this Press this button Scroll forward [] Scroll backward [] E-100 PLAYBACK Playing a Movie Use the following procedure to play back a movie recorded in the Movie Mode. 1. Align the POWER/Function Switch with PLAY. 2. Use [] and [] to scroll through the images on the monitor screen until the movie you want to play is displayed. Movie Mode icon 3. Press the shutter release button to start playing the movie. • The following describes operations that are available during movie playback. If you want to do this Press this button Toggle the movie between full screen and quarter screen view SET/DISP Playback forward [] Playback in reverse [] Pause playback Shutter release button Skip to the next frame while playback is paused [] Skip to the previous frame while playback is paused [] Exit movie playback MENU E-101 PLAYBACK Playing a Panorama Use the following procedure to play back a panorama recorded in the Panorama Mode. 1. Align the POWER/Function Switch with PLAY. 2. Use [] and [] to scroll through the images on the monitor screen until the panorama you want to play is displayed. Panorama Mode icon 3. Press the shutter release button to start playing the panorama. • The following describes operations that are available during panorama playback. If you want to do this Press this button Toggle the panorama between full screen and compressed view SET/DISP Scroll forward [] Scroll back [] Pause playback Shutter release button Skip to the next image while playback is paused [] Skip to the previous image while playback is paused [] Exit panorama playback MENU E-102 PLAYBACK Enlarging the Playback Image Use the following procedure to enlarge the playback image on the screen. You can select either 2X or 4X enlargement. 1. Align the POWER/Function Switch with PLAY. 2. Use [] and [] to display the image you want to enlarge. 3. Slide the zoom slider towards T(TELE) to 4X zoom in on the image. • Operating the zoom slider sometimes causes a cropping boundary (page E-109) to appear in the image. 4. Each operation of the zoom slider change the zoom factor as follows: 1X 2X 4X. 2X • The following describes operations that are available while an enlarged image is on the playback screen. E-103 PLAYBACK Displaying the 9-image View If you want to do this Do this Display on-screen guidance messages Press SET/DISP Shift the view right Press []. Shift the view left Press []. Shift the view upwards Press []. Shift the view downwards Press []. Change the zoom factor: 1X 2X 4X Operate the zoom slider. Return the image to normal size Press MENU. The following procedure displays nine images on the monitor screen at the same time. 1. Align the POWER/Function Switch with PLAY. 2. Slide the zoom slider towards W (WIDE) . • This displays the 9-image view, starting with the last image you recorded. 1 2 3 4 5 6 7 8 9 [] [] IMPORTANT! • You cannot enlarge movie or panorama images. [] [] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 NOTE • Sliding the zoom slider towards W (WIDE) while a normal size (1X) image is on the display switches to the 9-image view. • The following describes operations that are available while the 9-image view is on the monitor screen. To do this Press this button Scroll forward [] Scroll backward [] Display the selection pointer (See following section.) SET/DISP Exit the 9-image view Any button other than the above three. E-104 PLAYBACK 3. Use [], [], [] and [] to move the pointer to the image you want to select, and then press Selecting a Specific Image in the 9-image View SET/DISP. • This displays the single-image view of the selected 1. Display the 9-image view. image. 2. Press SET/DISP. • This causes a pointer to appear in the upper left corner of the monitor screen. E-105 PLAYBACK Displaying the Histogram The following procedure displays a histogram of an image's luminance components. The histogram is a tool you can use to check the exposure of an image. 1. Align the POWER/Function Switch with PLAY. 2. Use [] and [] to display the image whose histogram you want to view. 3. Press SET/DISP a number of times until the histogram appears. • See "Changing the Contents of the Monitor Screen" on page E-27 for information about how the monitor screen contents change when you press the SET/ DISP button. Histogram 4. Use [] and [] to scroll to an...