Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Compose the shot. . Moving the zoom lever toward i (telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j(wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.) . You can turn the Iring to zoom in on your Zoom bar subject (Step Zoom, p. 57). Taking Pictures (Smart Auto) AF Frame Focus. . Press the shutter button halfway to focus. • The flash will rise automatically in dark environments. • When the camera focuses, it will beep twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point. Shoot. . Press the shutter button fully to shoot. • The camera will play the shutter sound and shoot. The flash will automatically fire in low light conditions if it has been raised. • The image will appear on the screen for about two seconds. . You can take a second picture even while an image is displayed by pressing the shutter button again. What if an icon appears in the upper right of the screen? The icon for the determined scene will appear in the upper right of the screen. For details on the icons that appear, see “Scene Icons” (p. 179). Choosing the subject to focus on (Tracking AF) After pressing the obutton and displaying , point the camera so that is on the subject you want to focus on. Press and hold the shutter button halfway to display a blue frame where focus and exposure will be maintained (Servo AF). Press the shutter button fully to shoot. 25 Taking Pictures (Smart Auto) What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (p. 179) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (p. 74). • What if white and gray frames appear when you point the camera toward a subject? When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range (p. 88). If the main subject moves, however, the gray frames will disappear, leaving only the white frame. • What if a blue frame appears when you press the shutter button halfway? A blue frame appears when a moving subject is detected; the focus and exposure will continuously adjust (Servo AF). • What if the indicator blinks orange and flashes on the screen? Attach the camera to a tripod so that the camera does not move and blur the image. • What if the camera does not play any sounds? Pressing the l button while turning on the camera power will turn off all sounds except for warning sounds. To turn the sounds on, press the n button to choose [Mute] in the 3 tab, then press the qr buttons to choose [Off]. • What if the image comes out dark even if the flash fired when shooting? The subject is too far away for the flash to reach. The effective flash range is approximately 50 cm – 6.5 m (1.6 – 21 ft.) at maximum wide angle (j), and approximately 90 cm – 3.0 m (3.0 – 9.8 ft.) at maximum telephoto (i). • What if the camera beeps once when the shutter button is pressed halfway? Your subject may be too close. Move the zoom lever toward j and hold it until the lens stops moving. The camera will be at its maximum wide angle setting and you will be able to focus on subjects that are about 5 cm (2.0 in.) or more away from the end of the lens. Move the zoom lever toward i and hold it until the lens stops moving. The camera will be at its maximum telephoto setting and you will be able to focus on subjects that are about 30 cm (12 in.) or more away from the end of the lens. • What if the lamp lights when the shutter button is pressed halfway? To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas. • What if the h icon blinks when you try to shoot? The flash is charging. You can shoot when recharging ends. • “Wrong flash position. Restart the camera.” appears on the screen. Appears if your finger is pressing on the flash when it tries to pop-up or if something else hinders the movement of the flash. 26 Viewing Images You can view the images you have taken on the screen. Enter Playback mode. . Press the 1 button. • The last image you took will appear. Choose an image. . Pressing q or turning the E dial counterclockwise will cycle through the images in the reverse order they were taken, from the newest image to the oldest. . Pressing ror turning the E dial clockwise will cycle through images in the order they were taken, from oldest to newest. . The images change more quickly if you keep the qr buttons pressed, but they will appear coarse. . The lens will retract after approximately 1 minute elapses. If the flash has been raised, the flash will lower. . Pressing the 1 button again while the lens is retracted will turn off the power. Switching to Shooting mode Pressing the shutter button halfway while in Playback mode switches the camera to Shootin...