Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
. Choose [Start-up Image], then press the m button. . Press the qr buttons or turn the E dial to choose [3], then press the m button. . Press the qr buttons or turn the E dial to choose an image, then press the m button. . Press the qr buttons or turn the E dial to choose [OK], then press the m button to complete registration. Any previously registered start-up image will be overwritten when registering a new start-up image. 157 Changing Camera Settings Register the start-up image or sounds with the included software The dedicated operation sounds and start-up images on the included software can be registered to the camera. Refer to the Software Guide for details. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 – 9999, and saved to folders of up to 2,000 images. You can change the file number assignment. . Choose [File Numbering], then press the qr buttons to choose an option. Even if you shoot using a new memory card, the file numbers Continuous are assigned consecutively until an image with the number 9999 is taken/saved. If you replace the memory card with a new one, or a new folder Auto Reset is created, file numbering begins with 0001 again. • If you use a memory card already containing images, the newly assigned file numbers may continue the existing numbering for both [Continuous] and [Auto Reset]. If you want to start over with file number 0001, format the memory card before use (p. 22). • Refer to the Software Guide for information regarding folder structure or image types. 158 Changing Camera Settings Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. . Choose [Create Folder], then press the qr buttons to choose [Daily]. . Images will be saved into folders created on each shooting date. Changing the Lens Retract Time For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode (p. 27). If you want the lens to retract immediately when you press the 1button, set the retract time to [0 sec.]. . Choose [Lens Retract], then press the qr buttons to choose [0 sec.]. Turning Off the Power Saving Function You can set the power saving function (p. 51) to [Off]. Setting it to [On] is recommended to save battery power. . Choose [Power Saving], then press the m button. . Press the op buttons or turn the E dial to choose [Auto Power Down], then press the qr buttons to choose [Off]. . If you set the power saving function to [Off], be sure to turn the camera off after use. 159 Changing Camera Settings Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 51). This also works when [Auto Power Down] is set to [Off]. . Choose [Power Saving], then press the m button. . Press the op buttons or turn the E dial to choose [Display Off], then press the qr buttons to choose a time. . In order to save battery power, you should choose less than [1 min.]. Using the World Clock When travelling abroad, you can record images with local dates and times simply by switching the time zone setting. If you pre-register the destination time zones, you can enjoy the convenience of not having to switch the Date/ Time settings. Set the home time zone. . Choose [Time Zone], then press the m button. . When setting this for the first time, check the information that displays on the screen at the left, then press the m button. . Press the qr buttons or turn the E dial to choose the home time zone. . To set daylight saving time (adds 1 hour), press the opbuttons to choose . . Press the m button. 160 Changing Camera Settings Set the world time zone. . Press the op buttons or turn the E dial to choose [ World], then press the m button. . Press the qr buttons or turn the E dial to choose the destination time zone. . You can also set the daylight saving time as in Step 1. . Press the m button. Choose the world time zone. . Press the op buttons or turn the E dial to choose , then press the n button. .. will appear on the shooting screen (p. 178). If you change the date or time in the setting (p. 20), your [ Home] time and date will automatically change. Changing Distance Units You can change the distance units that display in the MF indicator (p. 93) from m/cm to ft/in. . Choose [Distance Units], then press the qr buttons to choose [ft/in]. 161 Changing Shooting Function Settings If you set the mode dial to G, you can change the settings in the 4 tab (p. 47). Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 182 – 185). Turning Off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp. . Choose [AF-assist Beam], then press the qr buttons to choose [Off]. Changing the Flash Tim...