Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The power saving function will not activate during Auto Play or during a computer connection (p. 96, 106). . Preparing Camera, 31 Basic Functions Switching between Shooting and Playback You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or erasing an image immediately after it is shot. Shooting Mode Playback Mode The lens does not retract for approximately 1 minute after the camera switches to Playback mode. 32 Shooting Mode ..Slide the mode switch to . Playback Mode ..Slide the mode switch to . • When a printer (sold separately) is connected, images can be printed (see the Direct Print User Guide). • When the camera is connected to a computer, recorded images can be downloaded to and viewed with a computer (p. 106). When a printer (sold separately) is properly connected, the , or icon appears on the LCD monitor. Shooting – The Basics See Functions Available in Each Shooting Mode (p. 159) at the end of this manual to find out which settings can be changed in which Shooting modes. Auto Mode Mode Dial In this mode, all you have to do is press the shutter button and let the camera do everything else. 1Check that the camera is in Shooting mode (p. 32). 2Turn the shooting mode dial to . 3Aim the camera at the subject you wish to shoot. 4Use the zoom lever to achieve the desired composition (relative subject size in the viewfinder). : Decreases the size of the subject (Wide angle) : Magnifies the size of the subject (Telephoto) • The angle of view can be adjusted within the 35 to 140 mm range, in 35mm film equivalent. • When the LCD monitor is on, the combined use of the digital zoom and optical zoom enables magnified shooting up to the following magnification (Digital Zoom (p. 47)). PowerShot A520: approx. 14x PowerShot A510: approx. 13x 5Press the shutter button halfway. • The shutter button has a two-stage action. 33 The Basics Shooting – The Basics Pressing Halfway Pressing halfway automatically sets the exposure and focus. • Two beeps will sound when the camera has finished metering, and the upper indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green. • The lower indicator will blink yellow and the beep will sound one time if the subject is difficult to focus on. 6Press the shutter button all the way. Pressing Fully Pressing fully releases the shutter. • You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound. • The upper indicator blinks green while data is recorded onto the memory card. • The picture appears for approximately three seconds on the LCD monitor, if it is on. 34 • See page 159 for settings that can be changed in this mode. • With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 36). • If the indicator blinks orange or yellow while you press the shutter button halfway, you can still press fully to take the shot. • Images are first saved into the camera’s internal memory before being recorded onto the memory card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. • The beep and shutter sound can be set [On/ Off] in the [Set up] menu (p. 70). • Even when the shutter sound is set to [ , , (On)] (p. 74), no sound will be heard if [Mute] is set to [On]. • There is no shutter sound in movie mode. • Shots cannot be taken while the flash is charging. Shooting – The Basics Shooting with the Viewfinder You can save power by turning the LCD monitor off (p. 24) and using the viewfinder to shoot. 1Compose the image so that the subject appears in the center of the frame in the viewfinder (autofocus range). Viewfinder window Shows approximate center of the image About the Autofocus Function This camera employs AiAF (artificial intelligence autofocus) technology, which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly off-center. Image Seen in Viewfinder vs. Recorded Image When shooting an image, a larger range than the one visible in the viewfinder usually gets recorded. You can confirm the actual range that will be recorded in the LCD monitor. In addition, due to the viewfinder’s specification, the range visible in the viewfinder may actually differ from the actual recorded image. The closer the subject is to the lens, the more noticeable the difference will be. In some cases, portions of images shot up close that appear in the viewfinder will not appear in the recorded image. You are recommended to use the LCD monitor during macro photography (p. 44). 35 The Basics Shooting – The Basics AF-assist Beam • The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions. • The AF-assist beam can be turned off...