Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
About the Histogram • The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward to the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure 32 Shooting – The Basics See Functions Available in Each Shooting Mode (p. 151) at the end of this manual to find out which settings can be changed in which Shooting modes. 4Use the zoom lever to achieve the desired composition (relative subject size in the viewfinder). Auto Mode Mode Dial In this mode, all you have to do is press the shutter button and let the camera do everything else. 1Check that the camera is in Shooting mode (p. 26). 2Turn the Shooting mode dial to . 3Aim the camera at the subject you wish to shoot. : Decreases the size of the subject (Wide angle) : Magnifies the size of subject (Telephoto) • The angle of view can be adjusted within the 35 to 105 mm range, in 35mm film equivalent. • When the LCD monitor is on, the combined use of the digital zoom and optical zoom enables magnified shooting up to approx. 10x (See Digital Zoom, p. 46). 33 Shooting – The Basics 5Press the shutter button halfway. • The shutter button has a two-stage action. Pressing Halfway Pressing halfway automatically sets the exposure and focus. • Two beeps will sound when the camera has finished metering, and the indicator next to the viewfinder will light green or orange. If the LCD monitor is on, the AF frame will appear green. • The indicator next to the viewfinder will blink yellow and the beep will sound one time if the subject is difficult to focus on. 6Press the shutter button all the way. Pressing Fully Pressing fully releases the shutter. 34 • You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound. • The indicator next to the viewfinder blinks green while data is recorded onto the CF card. • The picture appears for two seconds on the LCD monitor, if it is on. ..See page 151 for settings that can be changed in this mode. ..With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 36). ..If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot. ..Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory. ..The beep and shutter sound can be set On/Off in the Set up menu (p. 69). ..When the shutter sound is set to [ , , (On)] (p. 72) and [Mute] is set to On, no sound will be heard. ..There is no shutter sound in movie mode. ..Shots cannot be taken while the flash is charging. Shooting – The Basics Shooting with the Viewfinder You can save the power by turning the LCD monitor off (p. 28) and using the viewfinder to shoot. 1Compose the image so that the subject appears in the center of the frame in the viewfinder (autofocus range). 35 About the Autofocus Function This camera employs AiAF technology (artificial intelligence autofocus) which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly off- center. Image Seen in Viewfinder vs. Recorded Image Please note that the actual image may differ from the image seen in the optical viewfinder due to the physical separation between the viewfinder and lens. This is more noticeable the closer the subject is to the lens. In some cases, portions of images shot up close that appear in the viewfinder will not appear in the recorded image. Please use the LCD monitor to shoot images up close (p. 44). Shows approximate Viewfinder window center of the image Shooting – The Basics AF-assist Beam • The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions. • The AF-assist beam can be turned off (p. 67). For example, if animals are your subject, turn off the beam when shooting in the dark to avoid startling them. However, please keep in mind the following facts. • If the AF-assist beam is turned off, it may become more difficult for the camera to focus in dark conditions. • The red-eye reduction lamp may emit when you press the shutter button halfway even if the AF-assist beam is turned off. In order to prevent any lamp from emitting before the flash fires, set both the red-eye reduction function and the AF-assist beam to [Off] in the Shooting menu. 36 Reviewing an Image Right after Shooting Mode Dial After a photo is taken, the image displays on the LCD monitor for two seconds. In addition, the image will keep on displaying regardless of the review duration setting if one of the following operations is performe...