Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
1. Device Server List Area: All devices will be searched and listed in this area. You can arrange different favorite group and virtual COM ports. 2. Device Server Information Area: Click on the serial device server or move cursor to the serial device server, the related information will be shown on this area. 3. Configuration Area: Click on the item on the Device Server List Area, the configuration page will display on the area. 4. Quick Tool Area: Useful management functions shortcut. EKI-1351/1352 User Manual 22 3.2 Discovering Serial Device Servers 3.2.1 Auto Searching Advantech Serial Device Server Configuration Utility will automatically search all the EKI, ADAM and EDG series device servers on the network and show them on the Device Server List Area of the utility. The utility provides an auto-search function to show your device(s) by simply executing the configuration utility program from the Start Menu as follows: Start Menu --> All Program --> Advantech eAutomation --> Serial Device Server Configuration Utility From here all device on the same network domain will be searched and display on Device Server List Area. You can click on the device name to show the features of the specific device. Click on the "+" before the model name, and the utility will expand the tree structure to show the individual device name. Click on the “-“ before the model name, and the utility will collapse the tree structure. For Example, EKI-1352 in this figure is shown "EKI-1352-A6E63C" after expanding the tree structure. Note When you run the Configuration Utility for the first time, the default device name is "MAC ID". In this case, the device name "EKI-1352A6E63C" means the device "MAC ID" is "00 D0 C9 A6 E6 3C". You can change the default device name in System Tab of Device Properties. Chapter Configuration Select the device in this sub-tree. The first tab on the “Configuration Area” shows the summary of “Basic Information” included device Type, version, and name, “Ethernet Information”, and “Serial Port Information”. In the serial port information frame, it displays the operation mode, status and connected host IP. 23 EKI-1351/1352 User Manual Click on the “+” before the device name, and the utility will expand the interfaces on this device server. Click on each item, you will entry the configuration page to change the setting. The configuration will be introduced on following sections. EKI-1351/1352 User Manual 24 Chapter Configuration 25 EKI-1351/1352 User Manual 3.2.2 Clear Device List and Search Again You can click the button on the “Quick Tool Area”; utility will clear all list device servers in the Device Server List Area and re-search again. Don’t use this function frequently. The warning message will be pop-up when you double click this button. You can click the button on the “Quick Tool Area”; utility will search serial device server on local LAN. 3.2.3 Manual Appending Using “Add IP address to Favorite” or “Search a Range of IP addresses” function, you are able to add one device or group of devices to “Favorites”. These devices can locate on local network domain or other network domain. EKI-1351/1352 User Manual 26 3.3 Network Settings This section explains how to configure the EKI-1351/1352 series network using this utility so that it can communicate over a network with serial devices. Click on the “+” before the model name (e.g. EKI-1352), and the utility will expand the tree structure to show the individual device name. And click on the “+” before the device name, and the utility will expand the interfaces on this device server. Select the Ethernet interface. MAC address: The MAC address is for the local system to identify and locate each serial device servers. This MAC address is already set before delivery from factory, hence no need for further configuration. Chapter Configuration 27 EKI-1351/1352 User Manual IP address, Subnet Mask, Default Gateway: You can choose from four possible IP Configuration modes --- Static or DHCP. Static IP User defined IP address, Subnet Mask, and Default Gateway. DHCP + Auto-IP DHCP Server assigned IP address, Subnet Mask, Default Gateway, and DNS. Note! When you have finished the configuration of these settings for each category, please press the “Apply” button in order to make these settings effective on the Serial Device Server. (Will reboot your Serial Device Server immediately) EKI-1351/1352 User Manual 28 3.3.1 Wireless Basics 3.3.1.1 Wireless Basic Information l Firmware Version: Here is the firmware version of the wireless module embedded in the EKI-1531 and EKI-1352. The wireless module firmware might affect the wireless connection. Write down the version number and provide to our customer service if you have wireless connection problems. l MAC Address: The MAC address is for the local system to identify and locate each serial device servers. This MAC address is already set before delivery from factory, hence no need for further configuration. 3.3.1.2 Association...
Эта инструкция также подходит к моделям:Компьютеры - EKI-1351 (3.05 mb)