Оценок - 1, средний балл: 4 ( )

Производитель: Canon Размер: 6.73 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Фотоаппараты - Speedlite 580EX II (5.23 mb)

Видеокамеры - Speedlite 580EX II (7.01 mb)

1 Set the slave units. ..See “Setting the Slave Units” on page 41 to set the slave unit’s ID to <1>, <2>, or <3>. ..For slave <3>, also set the flash exposure compensation as necessary. 2 Set the master unit and shoot. ..Follow “Setting the Master Unit and Shooting” on page 42. In step 4, select . ..If is set, the slave unit in slave group <3> will not fire. ..If you point the slave unit in slave group <3> toward the subject, the subject will be overexposed. Modeling Flash If the camera has a depth-of-field preview button, pressing it will fire the flash continuously for 1 sec. This is called the modeling flash. It enables you to see the shadow effects on the subject and the lighting balance. You can fire the modeling flash for both wireless and normal flash shooting. Do not fire the modeling flash more than 10 consecutive times. If you fire the modeling flash 10 consecutive times, allow the Speedlite to rest for at least 10 min. to avoid overheating and deteriorating the flash head. The modeling flash cannot be fired with the EOS REBEL 2000/300 and Type-B cameras (p.2). About Slave Group Control For example, if you have the slave ID set to <1> for three slave units, all three slave units will be controlled as if they were one Speedlite in slave group A. ID = A ID = A ID = A Slave group A Setting the Flash Output for Each Slave With manual flash and multiple Speedlites, you can set a different flash output for each slave unit. All settings are done with the master unit. 1 Press the button so that is displayed. 2 Press the button so that blinks. 3 Select the flash ratio. ..Turn the <9 > dial to select or , then press the <8> button. 4 Set the flash output. ..Press the <8> button. • The slave ID will blink. ..Turn the <9> dial to set the flash output for , then press the <8> button. ..The slave ID will blink. Turn the <9> dial to set the flash output for , then press the <8> button. ..The slave ID will blink. Turn the <9> dial to set the flash output for , then press the <8> button. • All the slave IDs will light. Setting Manual Flash and Stroboscopic Flash with the Slave Manual flash or stroboscopic flash can be set manually with the slave unit. As with studio flash units, you can set the flash output individually with the slave units for wireless or manual flash. Manual Flash ..Hold down the button for 2 sec. or more. • will blink. ..Set the manual flash output (p.22). Stroboscopic Flash ..Hold down the button for 2 sec. or more. • will blink. ..Press the button again and

will blink. ..Set the stroboscopic flash (p.24). Reference 580EX II System................................................... 48 Troubleshooting Guide ......................................... 50 Specifications ....................................................... 52 Using a Type-B Camera ....................................... 55 580EX II System • Speedlite 580EX II (On-camera/Master unit) • Speedlite Transmitter ST-E2 Dedicated transmitter for wireless control of 580EX II/430EX set as slave units. • Compact Battery Pack CP-E4 Compact, lightweight, and portable external power pack. Provides the same level of dust- and water-resistance as the 580EX II. It uses eight size-AA alkaline or Ni-MH batteries. It can also use size-AA lithium batteries. • EX-series Speedlite with slave function • Off-Camera Shoe Cord OC-E3 Enables the 580EX II to be connected to the camera up to 60 cm/2 ft away. Provides the same level of dust- and water-resistance as the 580EX II. All of the EOS camera’s automatic functions can be used. • Speedlite Bracket SB-E2 For the external power pack, use .. above. If a non-Canon, external power pack is used, it may cause malfunction. About Color Temperature Information Transmission When the flash fires, the color temperature information is transmitted to the EOS DIGITAL camera. This feature optimizes the flash picture’s white balance. When the camera’s white balance is set to or , it will work automatically. To see if this feature works with your camera, see “White Balance” under “Specifications” in your camera’s instruction manual. About the AF-Assist Beam Under low-light or low-contrast conditions, the built-in AF-assist beam will be emitted automatically to make it easier to autofocus. The AF- assist beam works with all EOS cameras. The AF-assist beam is compatible with 28mm and longer lenses. The effective range is shown below. Position Effective Range Center 0.6 - 10 m / 2.0 - 32.8 ft. Periphery 0.6 - 5 m / 2.0 - 16.4 ft. Troubleshooting Guide If there is a problem, refer to this Troubleshooting Guide. The Speedlite does not fire. ..The batteries are installed in the wrong orientation. • Install the batteries in the correct orientation. (p.8) ..The Speedlite’s internal batteries are exhausted. • If the flash recycling time takes 30 sec. or longer, replace the batteries. (p.8) • Install the Speedlite’s internal batteries even when you u...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: