Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This Custom Function can be used to obtain 2nd-curtain sync effects even with EX-series Speedlites which do not have this feature (except Speedlite 270EX). ..When using EX-series Speedlites having the shutter curtain synchronization function, C.Fn II -6’s setting does not take effect. Set the shutter curtain synchronization in the Flash functions settings menu (p.122) or directly on the flash. ..When using a Speedlite 270EX, shutter curtain synchronization can be set in the Flash functions settings menu. ..If 1 is set and you press the shutter button completely, note that the flash will fire a total of two times right before the exposure ends. ..When using 2nd-curtain sync, set the shutter speed to 1/50 sec. or slower. If the shutter speed is 1/60 sec. or faster, 1st-curtain sync will be applied even if 1 is set. C.Fn II -7 Flash firing Enables or disables the firing of an external flash or non-Canon flash connected to the PC terminal. 0: Enable 1: Disable Convenient when you want to use the external flash’s AF-assist beam only. Note that whether or not the AF-assist beam is emitted depends on the C.Fn III -15 setting. C.Fn II -8 Viewfinder info. during exposure 0: Disable 1: Enable The viewfinder information will be displayed even during an exposure. Displays the exposure setting, number of remaining shots, etc., during continuous shooting. When the shooting mode is set to “Bulb”, even if setting 1 is set, it will not take effect. C.Fn II -9 LCD panel illumination during Bulb 0: Off 1: On during Bulb If the LCD panel illumination is on (p.116) and you take a bulb exposure, the illumination will continue until the bulb exposure ends. This is convenient when you are taking a bulb exposure in low light and want to check the exposure time. C.Fn II -10 INFO. button when shooting You can change what is displayed on the LCD monitor when you press the button while the camera is ready to shoot. 0: Displays shooting functions (p.23) Displays shooting functions as found on the top LCD panel and in the viewfinder. While the shooting settings are displayed, you can press the
button to display the respective function screen and turn the <6> or <5> dial to change the setting. 1: Displays camera settings (p.246) Displays the camera settings. 217 C.Fn III: Autofocus/Drive C.Fn III -1 USM lens electronic MF The USM lens electronic MF can be enabled or disabled when you use any of the following lenses. EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF85mm f/1.2L II USM, EF200mm f/1.8L USM, EF300mm f/2.8L USM, EF400mm f/2.8L USM, EF400mm f/2.8L II USM, EF500mm f/4.5L USM, EF600mm f/4L USM, EF1200mm f/5.6L USM, EF28-80mm f/2.8-4L USM 0: Enable after One-Shot AF After focus is achieved in One-Shot AF, electronic MF is enabled. If C.Fn IV -1-2/3 is set, it is also enabled before focus is achieved. 1: Disable after One-Shot AF After focus is achieved in One-Shot AF, electronic MF is disabled. If C.Fn IV -1-2/3 is set, it is possible before focus is achieved. 2: Disable in AF mode Electronic MF is disabled in the AF mode. C.Fn III -2 AI Servo tracking sensitivity During focusing in AI Servo AF mode, the AF sensitivity for tracking subjects (or obstacles) moving into the AF points can be set to one of five levels. If it is set toward [Slow], interruptions by any obstacles will be less disruptive. It makes it easier to keep tracking the target subject. If it is set toward [Fast], it will be easier to focus any subject which suddenly enters the picture from the side. Convenient when you want to successively photograph multiple subjects located at random distances. C.Fn III -3 AI Servo 1st/2nd image priority When AI Servo AF is used with continuous shooting, you can change the Servo’s operation characteristics and shutter-release timing. 0: AF priority/Tracking priority For the first shot, focusing the subject is given priority. For the second and following shots during continuous shooting, focus-tracking of the subject is given priority. 1: AF priority/Drive speed priority For the first shot, focusing the subject is given priority. During continuous shooting, the continuous shooting speed is given priority over the focus-tracking of the subject. 2: Release/Drive speed priority For the first shot, shutter release is given priority over focusing the subject. During continuous shooting, the continuous shooting speed is given priority more than with setting 1. 3: Release/Tracking priority For the first shot, shutter release is given priority over focusing the subject. For the second and following shots during continuous shooting, focus-tracking of the subject is given priority. C.Fn III -4 AI Servo AF tracking method In the AI Servo AF mode while you are focus-tracking a subject, the camera can either continue focusing the target subject even if a closer subject (closer than at the main focus point) suddenly appears in the picture, or the camera can switch to focus the closer subject. * Main focus point = With a...