Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Moreover, the overlapping areas will be displayed in gray on the color wheel and the color is applied by aggregating adjustment results. To avoid an overlapping of the ranges of effect, select the subject color which has a [ ] and reset it so that the range of effect of the hue and saturation no longer overlap. Deleting an Adjusted Be aware that you cannot recover deleted colors. From the list, adjusted color you want to delete and key the keyboard. Introduction Preparinga Sample Basic Windows Pre-adjustments ImageCharacteristics Saving Preferences Reference Contents . The selected adjusted color is Color Display Mode You can select the color display mode which will be the basis for color adjustment from three options (HSL, Lab or RGB) as well as check values for adjusted colors. Switches the color display mode Color value after adjustment Color value before adjustment O When “HSL” is selected for the color display mode, you can only change the color value for before adjustment by entering a number. .. HSL is a color mode expressed by the three elements of hue (H), saturation (S) and luminosity (L). .. Lab is a color mode developed by the CIE (Commission Internationale d’Eclairage) where L displays lightness, a displays color elements from green to magenta and b displays color elements from blue to yellow. .. RGB is a color mode which red (R), green (G) and blue (B), the three primary (additive colors) of the visible light spectrum. Adjusting Brightness and Contrast (Gamma Characteristic) You can adjust the brightness and contrast of a specific area using the tone curve. Adjust the brightness and contrast. Click to add a [ ] (adjustment point) and adjust by dragging The setting value of the selected point (you can also enter numerical values) . The brightness and contrast of the image change. O The horizontal axis shows the input level and the vertical axis shows the output level. O The maximum number of [ ] is 10. O To delete a [ ] , select the [ ] and then either press the key on the keyboard or double- click on the [ ]. Introduction Preparinga Sample Basic Windows Pre-adjustments ImageCharacteristics Saving Preferences Reference Contents Saving the Adjustments as a Picture Style File Adjustments specified in the [Tool palette] ( p.9 to p.14) are saved on your computer as an original Picture Style file (extension “.PF2”). The adjustments are saved as a Picture Style file which is separate from the sample image, and the sample image used to perform the adjustments itself is not affected at all. 1 1 Click the [ ] button. . The [ Save Picture Style file] window appears. 2 2 Specify the file name and save destination and then click the [Save] button. O If you do not want to show the settings adjusted in PSE, checkmark [Disable subsequent editing] and save, so that the file cannot be opened again in PSE. . The file is saved as a Picture Style file in the specified save destination. Using a Picture Style File Saved Picture Style files can be registered in the camera and applied to shot images. They can also be applied to RAW images using Digital Photo Professional (hereinafter, “DPP”). Registering a Picture Style File to the Camera Picture Style files saved on your computer can be registered to the “Camera that has a Picture Style function settings” (For information on whether your camera is equipped with the Picture Style function, refer to the camera’s Instruction Manual.) using EOS Utility and applied to shot images. Refer to “Applying Picture Style Files to the Camera” of “Chapter 2 Setting the Camera from Your Computer” in “EOS Utility Instruction Manual” (PDF electronic manual) for details on operation. Using a Picture Style File with DPP Picture Style files saved on your computer can be applied to RAW images using DPP. Refer to “Using a Picture Style File” of “Chapter 3 Advanced Image Editing and Printing” in “Digital Photo Professional Instruction Manual” (PDF electronic manual) for details on operation. Introduction Preparinga Sample Basic Windows Pre-adjustments ImageCharacteristics Saving Preferences Reference Contents Even if you checkmark [Disable subsequent editing] and save, you can use the Picture Style file the same way as the Picture Style file without chekmarking and saved (Description on the right) . However, you will no longer able to open the Picture Style file in PSE. For this reason, we that you save separately beforehand the Picture file without checkmarking [Disable subsequent editing]. Preferences Exiting PSE You can perform color management settings such as specifying the In the main window, select the [File] menu .. [Exit]. work color space for the sample image displayed in the main window, or . PSE exits. setting the profile for the monitor. 1 1 Select the [Tools] menu .. [Preferences]. . The [ Preferences] window appears. 2 2 Specify the required settings and then click the [OK] button. . The settings are applied. Introduction Preparinga Sample Basic Windows Pre-adjustments ...