Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
• This camera sinks in water. Place your hand through the wrist strap to prevent the camera from sinking. • Faint, white, circular spots may appear in under-water flash photos due to reflections off of floating objects. This is not a malfunction. • Select (Underwater) in Scene Selection to shoot underwater with less distortion. GB • If water drops or other foreign matter is present on the lens, you will be 8 unable to record clear images. Do not open the lens cover where the sand is whirling. Cleaning after using the camera under/near water • Always clean the camera with water after use within 60 minutes, and do not open the battery/ memory card cover before cleaning is finished. Sand or water may get inside places where it cannot be seen. If not rinsed, water-proof performance will be degraded. • Allow the camera to sit in pure water poured into a cleaning bowl for about 5 minutes. Then, gently shake the camera, press each button, slide the zoom lever or the lens cover inside the water, to clean away any salt, sand or other matter lodged around the buttons or the lens cover. • After rinsing, wipe away water drops with a soft cloth. Allow the camera to dry completely in a shady location with good ventilation. Do not blow dry with a hair dryer as there is a risk of deformation and/or degraded waterproof performance. • Wipe away water drops or dust on the memory card/battery cover or terminal cover with a soft dry cloth. • This camera is constructed to drain water. Water will drain from openings around the ON/OFF (Power) button, zoom lever, and other controls. After removing from water, place the camera on a dry cloth for a while to allow water to drain. • Bubbles may appear when the camera is placed under water. This is not a malfunction. • The camera body may become discolored if it comes in contact with sunscreen or suntan oil. If the camera does come in contact with sunscreen or suntan oil, quickly wipe it clean. • Do not allow the camera to sit with salt water inside or on the surface. This may lead to corrosion or discoloration, and degradation of water-proof performance. • To maintain the water-proof performance, we recommend that once a year you take the camera to your dealer, or to an authorized repair shop, to have the sealing gasket of the battery/memory card cover, or of the multi- connector cover replaced for a fee. GB Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM Insert the CD-ROM into the CD-ROM drive. For Windows users: 1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop. For Macintosh users: 1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide] folder to your computer. 2 After copying is complete, double-click “index.html” in [eng] folder. Checking the supplied items • Camera (1) • Rechargeable battery pack NP-BN1 (1) • Multi-use terminal USB cable (1) • AC Adaptor AC-UB10/UB10B (1) • Power cord (mains lead) (not supplied in the USA and Canada) (1) • Paint pen (1) • Wrist strap (1) •CD-ROM (1) – Cyber-shot application software – “Cyber-shot User Guide” • Instruction Manual (this manual) (1) • Notes on the water-proofing (1) GB Identifying parts Identifying parts E Lens F (Playback) button G MOVIE (Movie) button H Screen/Touch panel I ON/OFF (Power/Charge) button J ON/OFF (Power/Charge) lamp K Shutter button L For shooting: W/T (Zoom) lever For viewing: (Playback zoom) lever/ (Index) lever M Hook for wrist strap N HDMI connector O Multi connector (Type3b) P Memory card slot Q Access lamp R Battery eject lever S Connector cover T Battery/memory card cover U (TransferJet™) mark V Battery insertion slot W Tripod receptacle • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. A Microphone B Lens cover C Flash D Self-timer lamp/Smile Shutter lamp/AF illuminator GB Inserting the battery pack Eject lever Inserting the battery pack Eject lever 1 Open the cover. 2 Insert the battery pack. • While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. Charging the battery pack GB12Power cord (Mains lead) For customers in the USA, Canada For customers in countries/regions other than the USA and Canada Power/Charge lamp Lit: Charging Off: Charging finished Flash: Charging error 1 1 2 Connect the AC Adaptor to the wall outlet (wall socket). The Power/Charge lamp lights orange, and charging starts. • Turn off the camera while charging the battery. • You can charge the battery pack even when it is partially charged. • When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack. Notes • Close the cover securely, so that the yellow mark under the slide lock is hidden. • When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is connected to the...