Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Sony, модель MVC-FD75

Производитель: Sony
Размер: 256.73 kb
Название файла: 3066544112.pdf
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


480) is recorded. •Select E-MAIL to record a 1/4-size (320 . 240) JPEG file besides a 640 . 480 JPEG file. E-mail files are suitable for e-mail transmission, etc. because they contain compressed data. •Select BITMAP to record a non-compressed image besides a JPEG file. This is good for recording images in clearer detail. •Select MULTI to record in the Multi-Image Continuos Recording mode. In this mode, Images are continuously recorded as 1 file each at a rate of about 1 every 0.25 seconds. In PLAY mode, if you select “ ” on the LCD screen with the control button, the images will be played back continuously like an animated slide show (Only once). When playing back on another machine, only 1 image will be displayed. Advanced 23-GB kChanging the mode settings Recording mode Recorded file File name (ex.) No. of images that can be recorded MVC– STANDARD FINE NORMAL JPEG (640 . 480) For index screen 001S.JPG 001S.411 25 - 40 15 - 20 E-MAIL JPEG (640 . 480) 001S.JPG JPEG (320 . 240) 001E.JPG 20 - 35 12 - 15 For index screen 001S.411 BITMAP non-compress (640 . 480) JPEG (640 x 480) 001S.BMP 001S.JPG 1 1 For index screen 001S.411 MULTI JPEG (960 . 720) For index screen 001M.JPG 001S.411 10 - 15 Notes • The file data for index screen is a available only on this camera. • If you attempt to record 55 images or above, “DISK FULL” appears on the LCD screen and you cannot record the image even when the remaining disk capacity indicator is not emptied. • 1/4-size E-mail files are stored in another folder. The compression ratio is standard and does not depend on the image quality settings. • A remaining capacity of about 1MB is needed when recording in BITMAP mode. After recording the BITMAP picture, “DISK FULL” appears on the LCD screen. • In MULTI mode, the program AE, picture effect and focus are fixed to the selected mode and effect, respectively, and the flash is kept OFF. The focus may not be right if the zoom is operated. The compression ratio is standard and does not depend on the image quality settings. • During playback of a series of images recorded in MULTI mode, the first image of the nine is displayed one-size smaller than the other normal-sized images. • Be sure to play back images recorded in MULTI mode on MVC-FD71/ FD73/FD75. Those images cannot be played back correctly on other models. • When the remaining disk capacity indicator flashes, image data cannot be recorded. • A MPEG file cannot be played back correctly on this camera. 24-GB QUALITY •Select STANDARD as a standard image quality. •Select FINE when giving priority to image quality. FLASH LEVEL < HIGH/ NORMAL*/ LOW> •Set to make the flash level higher than normal. •Normally select NORMAL. •Set to make the flash level lower than normal. FILE NUMBER •Select NORMAL to reset the numbering of files each time the floppy disk is changed. •Select SERIES to put numbers to files in sequence even if the floppy disk is changed. DEMO MODE Only when you use the AC power adaptor (optional), DEMO MODE appears in the menu. •Select ON to make the demonstration appear. The demonstration will start about 10 minutes after the power is turned on if the camera has not been operated. •Select OFF to deactivate the demonstration mode. Note To stop the demonstration, turn off the camera. Advanced 25-GB kChanging the mode settings Items in PLAY mode PROTECT Select this item to protect a displayed image(s) from being deleted by mistake. To protect or unprotect an image file, select the desired option from the menu while the image is displayed on the LCD screen. In SINGLE screen mode •Select ON to protect displayed image. •Select OFF to release protection of the image. In INDEX screen mode •Select ALL to protect all the images on the floppy disk. •Select SELECT to protect selected images. 1 Use the control button to display the red B mark at the image you want to protect. The selected image number reverses color. To cancel selection, press the control button again. The image number returns to normal. 2 Select “ENTER” with the control button, then press it. -appears on the upper left side of the image. To cancel protection of the images in INDEX screen mode, select the images you want to cancel protection in step 1, then press the control button. The “-” indicator at the upper left side of the image disappears. When you have finished the cancelling, select “ENTER” with the control button, then press it. To cancel protecting image, select “CANCEL” with the control button, then press it. The screen returns to the menu screen. 26-GB COPY Select this item to copy a displayed image(s) to another floppy disk. To copy an image(s), select the desired copy option from the menu while the image(s) is displayed on the LCD screen. In SINGLE screen mode •Select OK to copy displayed image. •Select CANCEL to cancel copying image. In INDEX screen mode •Select ALL to copy all the images on the f...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории