Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Make sure to position the lens farther away from the subject than the shortest shooting distance, approximately 2 cm (13/16 inches) (W)/30 cm (11 7/8 inches) (T), when shooting. (t step 5 in “Read This First”). • (Twilight mode) or (Landscape mode) is selected in the Scene mode when shooting still images. • The Focus preset function is selected. Select the auto focus mode (page 33). • Refer to “If the subject is out of focus” on page 34. Optical zoom does not work. • You cannot change the zoom scale when shooting movies. Precision digital zoom does not function. • Set [Digital Zoom] to [Precision] (page 47). • This function cannot be used while shooting movies. Smart zoom does not function. • Set [Digital Zoom] to [Smart] (page 47). • This function cannot be used when: – The image size is set to [7M] (DSC-W70), [6M] (DSC-W30/W40/W50) or [3:2]. – Shooting in Multi Burst mode. – Shooting movies. The flash does not work. • The flash is set to (Flash forced off) (t step 5 in “Read This First”). • You cannot use the flash when: – [Mode] (REC Mode) is set to [Burst] or [Multi Burst] (page 36). – (High sensitivity mode) or (Twilight mode) is selected in the Scene Selection. – When the mode dial is set to . • Set the flash to (Flash forced on) when (Landscape mode), (Snow mode) or (Beach mode) is selected in the Scene Selection. Fuzzy specks appear in images shot using the flash. • Dust in the air reflected the flash light and appeared in the image. This is not a malfunction. The close-up (Macro) function does not work. • (Twilight mode) or (Landscape mode) is selected in the Scene Selection (page 29). The date and time are not displayed. • While shooting, the date and time are not displayed. Only during playback, the date and time are displayed. The date and time are recorded incorrectly. • Set the correct date and time (t step 2 in “Read This First”). The F value and shutter speed flash when you press and hold the shutter button halfway down. • The exposure is incorrect. Correct the exposure (t step5 in “Read This First” ). The image is too dark. • You are shooting a subject with a light source behind the subject. Select the metering mode (page 34) or adjust the exposure (t step5 in “Read This First”). • When the brightness of the screen is too low, adjust the brightness of the LCD backlight (DSC-W50/W70 only) (page 23, t step5 in “Read This First”). • Turn on the screen (page 23). Troubleshooting The image is too bright. • You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the exposure (t step5 in “Read This First” ). • When the brightness of the screen is too high, adjust the brightness of the LCD backlight (DSC-W50/W70 only) (page 23, t step5 in “Read This First”). The image colors are not correct. • Adjust the [Color Mode] to [Normal] (page 32). Vertical streaks appear when you are shooting a very bright subject. • The smear phenomenon is occurring. This phenomenon is not a malfunction. Noise appears in the image when you view the screen in a dark place. • The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image. The eyes of the subject come out red. • Set [Red Eye Reduction] in the (Setup) menu to [On] (page 48). • Shoot the subject at a distance closer than the recommended shooting distance using the flash (t step 5 in “Read This First”). • Light the room and shoot the subject. Dots appear and remain on the screen. • This is not a malfunction. These dots are not recorded (page 8, t “Read This First”). The image seen through the finder does not indicate the actual recordable range. • The parallax phenomenon is occurring when the subject is close. To confirm the recordable range, use the LCD screen. Cannot shoot images in succession. • The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (t step 6 in “Read This First”). • The battery level is low. Install charged battery pack. Viewing images Refer to “Computers” (page 86) in conjunction with the following items. Your camera cannot play back images. • Press (t step 6 in “Read This First”). • The folder/file name has been changed on your computer (page 65). • When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed. • The camera is in USB mode. Delete the USB connection (page 63). The date and time are not displayed. • (Screen display switch) button is turned off (page 23). The image appears rough right after playback starts. • The image may appear rough right after playback starts due to image processing. This is not a malfunction. Color unevenness may appear during video playback. • This is not a malfunction. The recorded images are not affected. Images are not displayed on the screen. • Remove the cable for multi-use terminal (DSC-W50/W70) or the A/V cable (DSC-...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-W40 (2.94 mb)
Фотоаппараты - DSC-W50 (2.94 mb)
Фотоаппараты - DSC-W70 (2.94 mb)