Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
DSC-W50 2 Turn on the TV and set the TV/ video input switch to “video.” • For details, see the operating instructions supplied with the TV. 3 Press H to turn on the camera. © To audio/video input jacks DSC-W30/W40 A/V cable © To audio/video input jacks © To A/V OUT jack Control button Images shot with the camera appear on the TV screen. Press b/B on the control button to select the desired image. • When using your camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 55). If your TV has stereo input jacks, connect the audio plug (black) of the cable for multi-use terminal (DSC-W50) or the A/V cable (DSC-W30/W40) to the left audio jack. 78 On TV color systems If you want to view images on a TV screen, you need a TV with a video input jack and the cable for multi-use terminal (DSC-W50) or the A/V cable (DSC-W30/W40). The color system of the TV must match that of your digital still camera. Check the following lists for the TV color system of the country or region where the camera is used. NTSC system Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. PAL system Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc. PAL-M system Brazil ft CD « PAL-N system Argentina, Paraguay, Uruguay SECAM system Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc. o S 79 ■ À Troubleshooting Troubleshooting If you experience trouble with your camera, try the following solutions. Please understand that you give your consent that the contents of the internal memory may be checked when you send your camera to be repaired. 80 I Battery pack and power The battery pack cannot be installed. • As you insert the battery pack, use the tip of the battery pack to push the battery eject lever toward the lens (t step 1 in “Read This First"). • Install the battery pack correctly (t step 1 in “Read This First"). The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location (page 97). • The displayed battery remaining differs from the current one. Fully discharge and then charge the battery pack to correct the display. • The battery pack is discharged. Install the charged battery pack (t step 1 in “Read This First"). • The battery pack is dead (page 97). Replace it with a new one. The battery pack runs down too quickly. • Charge it sufficiently (t step 1 in “Read This First"). • You are using the camera in an extremely cold location (page 97). • The battery terminal is dirty. Clean the battery terminal with a cotton swab, etc., and charge the battery pack. • The battery pack is dead (page 97). Replace it with a new one. Cannot turn on the camera. • Install the battery pack correctly (t step 1 in “Read This First"). • The battery pack is discharged. Install charged battery pack (t step 1 in “Read This First"). • The battery pack is dead (page 97). Replace it with a new one. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again (t step 2 in “Read This First"). • The battery pack is discharged. Install charged battery pack (t step 1 in “Read This First"). 81 Troubleshooting I Shooting still images/movies The screen does not turn on even when the power is turned on. • Turn on the screen (page 23). Your camera cannot record images. • Check the free capacity of the internal memory or “Memory Stick Duo” (page 24). If it is full, do one of the following: -Delete unnecessary images (t step 6 in “Read This First"). - Change the “Memory Stick Duo”. • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 95). • You cannot record images while charging the flash. • When shooting a still image, set the mode dial to a position other than |p|. • Set the mode dial to fPf when shooting movies. • The image size is set to [640(Fine)] when recording movies. Do one of the following: - Set the image size to other than [640(Fine)]. - Insert a “Memory Stick PRO Duo” (page 95). The subject is not visible on the screen. • Your camera is set to the Playback mode. Press B to change to the recording mode (—► step 6 in “Read This First"). Recording takes a long time. • The NR slow shutter function is activated (page 20). This is not a malfunction. The image is out of focus. • The subje...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-W40 (2.94 mb)
Фотоаппараты - DSC-W50 (2.94 mb)