Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
• Pictures may have a mosaic-like appearance depending on the subject or the recording condition. • The number of recordable pictures depends on the subject. • The number of remaining pictures may not correspond with recorded frames. • The following functions cannot be used for pictures recorded in [TIFF]. – Auto bracket – Burst mode –[ROTATE] –[RESIZE] –[TRIMMING] • Refer to P18 for the number of recordable pictures. Recording pictures (advanced) Metering Mode [METERING MODE] AF Mode [AF MODE] SCN1SCN2 You can switch to the following metering modes. Multiple: This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method. Center weighted: This is the method used to focus on the subject on the center of the screen and measure the whole screen evenly. Spot: This is the method to measure the subject in the spot metering target A. 9-area-focusing: The camera focuses on any of 9 focus areas. You can record a picture in free composition without limiting the position of the subject. 3-area-focusing: The camera focuses on any of the left, center and right of the screen. This mode allows you to focus on the subject faster than any other modes in AF mode. 1-area-focusing: The camera focuses on the subject in AF area on the center of the screen. Spot-focusing: The camera focuses on the limited and narrow area in the screen. Recording pictures (advanced) Continuous AF [CONT.AF] • When setting to 3-area-focusing, pictures may become still while being focused on, however, this is not a malfunction. • When using the digital zoom or when you take pictures in dark places, the AF area is displayed on the center of the screen with a size wider than usual. • When multiple AF areas (max. 9 areas) light at the same time, the camera is focusing on all the AF areas. The focus position is not predetermined because it is set to the position the camera automatically determines at the time of focusing. If you want to determine the focus position to take pictures, switch the AF mode to 1-area-focusing mode. SCN1SCN2 This mode allows you to compose a picture more easily by always focusing on the subject. When the AF mode is set to 1-area-focusing or spot-focusing, the time required for focusing when pressing the shutter button halfway will be reduced. • When it is set to [ON], the [ ] indication appears. • When setting the manual focus, you cannot use the continuous AF. • The battery may be consumed faster than usual. • It may take time to focus on the subject after rotating the zoom lever from Wide to Tele or suddenly changing the subject from a distant one to a nearby one. • Press the shutter button halfway again when it is difficult to focus on the subject. Recording pictures (advanced) AF Assist Lamp [AF ASSIST LAMP] SCN1SCN2 Illuminating the subject with the AF assist lamp allows the camera to focus on the subject in low light conditions. When you press the shutter button halfway in dark places or other situations, an AF area wider than usual appears and the AF assist lamp 1 turns on. ON The AF assist lamp turns on under low light conditions. In this time, the AF assist lamp icon [ ] appears on the screen. The effective range of the AF assist lamp is 4.92 feet (1.5 m). OFF The AF assist lamp does not turn on. • Be sure of the following points when the AF assist lamp is in use. – Do not look in to the AF assist lamp closely. – Detach the lens hood. – Do not cover the AF assist lamp with your fingers. – The battery may be consumed faster than usual. • You cannot use the AF assist lamp in [SCENERY], [NIGHT SCENERY], [PANNING], [FIREWORKS] in scene mode (P58) and when setting [CONVERSION] (P79) to [ ] or [ ]. • When you do not want to use the AF assist lamp (e.g. when you take a picture of a subject in a dark place), set the [AF ASSIST LAMP] to [OFF]. In this case, it becomes difficult to focus on the subject. • The AF area is set only to a point on the center of the screen when the AF assist lamp is turned on. • A vignetting effect may appear on the circumference of the AF assist lamp because the AF assist lamp may be obscured by the lens, however, this does not cause a problem with the performance of the camera. Digital Zoom [D.ZOOM] SCN1SCN2 It is possible to further magnify a subject already magnified 12 times with the optical zoom 4 more times with the digital zoom, thereby reaching a maximum of 48 times. .Entering the digital zoom range When you rotate the zoom lever to the extreme Tele position, the on-screen zoom indication may momentarily pause. This is not a malfunction. You can enter the digital zoom range to continuously rotate the zoom lever to Tele or to release the zoom lever once and then rotate it to Tele again. WT W T 1 Optical zoom 2 Digital zoom • When using the digital zoom the picture quality becomes deteriorated. • In the digital zoom range, the stabilizer function may not be effective. ...