Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• Self-timer cannot be set to 10 seconds in [SELF PORTRAIT] in Scene Mode. • Setting of the self-timer cannot be performed in following conditions. – In [HI-SPEED BURST] in Scene Mode – When recording motion pictures - 63 Advanced (Recording pictures) [REC] Mode: Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Properly Underexposed Overexposed exposed Compensate the exposure Compensate the exposure towards positive. towards negative. 0 ]. Adjust the exposure by touching the slide bar. • Select [0 EV] to return to the original exposure. Touch [EXIT] to finish. • You can also press the shutter button halfway to finish. Note • EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by the aperture value and the shutter speed. • Exposure value is displayed in the touch icon at the top right of the screen. • The set exposure value is memorized even if the camera is turned off. • The compensation range of the exposure will be limited depending on the brightness of the subject. • Exposure compensation cannot be used when in [STARRY SKY] in Scene Mode. - 64 Advanced (Recording pictures) [REC] Mode: Taking Pictures Using Auto Bracket In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures. With Auto Bracket d1EV 1st picture 2nd picture 3rd picture d0EV j1EV i1EV screen a range of the ]/[ ]. • When you do not use Auto Bracket, select [OFF] (0). Touch [EXIT] to finish. • You can also press the shutter button halfway to finish. - 65 • Advanced (Recording pictures) ] appears on the screen. • When taking pictures using Auto Bracket after setting the exposure compensation range, the pictures taken are based on the selected exposure compensation range. Exposure value is displayed in the touch icon at the top right of the screen when the exposure is compensated. • The Auto Bracket setting is canceled if you turn the camera off or [SLEEP MODE] is activated. • When Auto Bracket is set, the Auto Review function is activated regardless of the Auto Review setting. You cannot set the Auto Review function in the [SETUP] menu. • The exposure may not be compensated with Auto Bracket depending on the brightness of the subject. •[OE] is set for the flash when Auto Bracket is set. • Burst is canceled when Auto Bracket is set. • Setting of the Auto Bracket cannot be performed in following conditions. – In [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in Scene Mode – When recording motion pictures - 66 Advanced (Recording pictures) [REC] Mode: n· . Taking Pictures using Burst Mode Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken. ]. Touch the item. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. Focus on the subject and take a picture. • Hold down the shutter button fully to activate the Burst Mode. [ ] [.] Burst speed (pictures/second) — approx. 1.8. Number of recordable pictures A — max. 3 › — max. 5 . The burst speed is constant regardless of the transfer speed of the card. • The burst speed values given above apply when the shutter speed is 1/60 or faster and when the flash is not activated. - 67 Advanced (Recording pictures) Note • Focus, exposure and white balance are fixed to the settings used for the first picture. • When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3. • If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors etc. where there is a large difference between the light and shade, the exposure maynot become optimal. • The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high etc. • Burst Mode is not canceled when the camera is switched off. • If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture data. •[OE] is set for the flash when burst is set. • Auto Bracket is canceled when burst is set. • You cannot use Burst Mode in following conditions. – In [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], and [PHOTO FRAME] in Scene Mode – When recording motion pictures - 68 Advanced (Recording pictures) [REC] Mode: Taking pictures while changing the skin texture (Cosmetic Mode) Pictures can be taken while setting the texture or clearness of the skin. Slide the [REC]/[PLAYBACK] selector switch to [!], and then press [MODE]. Touch [COSMETIC MODE]. Select the item and touch clearness. Item Adjustment contents [SOFT ...