Оценок - 2, средний балл: 4
(
)
)
|
Фото и характеристики Philips HP4997 |
Фрагмент инструкции
Do not use this appliance near bathtubs, showers, basins or other vessels containing water. • When you use the appliance in a bathroom, unplug it after use.The proximity of water presents a risk, even when the appliance is switched off. • During use, care should be taken to ensure that the supply cord does not come into contact with water or drape in the sink. • Do not insert any objects into the appliance to avoid electric shock. • Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. • Check the condition of the mains cord regularly. Do not use the appliance if the plug, the mains cord or the appliance itself is damaged. • If the mains cord is damaged,you must have it replaced by Philips,a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Polarized plug:This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug fits in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. Caution • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom.This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. • Never block the air grilles. • The appliance has a safety function. If the appliance overheats, it switches off automatically. The appliance remains live. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair, etc. • Always switch off the appliance before you put it down, even if it is only for a moment. • Always unplug the appliance after use. • Do not wind the mains cord round the appliance. • You may notice a characteristic odour when you use this hairdryer.This odour is caused by the ions that are generated and is not harmful to the human body. • Do not use the appliance on artificial hair. • This appliance is only intended for drying scalp hair. • Do not use the appliance for any other purpose than described in this manual. • Keep the hairdryer clean and free of dust, dirt and styling products such as mousse, spray and gel. • Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to theinstructions in this user manual, the appliance is safe to use based on scientific evidence available today. 2 Introduction Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at The Salon Proceramic AC Lite gives you the professional results in the comfort of your home. AC motor with long-life cycle provides poweful airflow for fast, professional drying results and the compact design and ultra light weight make the drying easy and comfortable.This hairdryer has also Ionic breeze to condition, reduce frizz and static and make the hair more shiny, moisture rich and smooth. 3 Dry your hair 1 Connect the mains plug to a mains socket. • You can use the appliance with or without the concentrator. Attach the concentrator (Fig. 5) onto the hairdryer (Fig. 9). » The concentrator enables you to direct the airflow at the brush or comb with which you style your hair. • To disconnect the concentrator, pull it off the hairdryer. 2 Adjust the airflow switch (Fig. 3) to I for drying short hair or styling hair, or II for ultra-quick drying. • Adjust the temperature switch (Fig. 2) to for hot airflow, for warm airflow, or for cool airflow. • Press the cool shot button (Fig. 1) and direct the cool airflow at your hair to fix your style and to add shine. • To turn the ion function on or off, adjust the ion slide switch to I or O (Fig. 6). » If the function is activated, the ion indicator light (Fig. 7) turns on. » The function provides additional shine and reduces frizz and static electricity.It is particularly suitable for dry and almost-dry hair. » When the function turns on, a special odor may be smelt. It is normal and caused by the ions which are generated. 3 Dry your hair by making brushing movements with the hairdryer at a small distance from your...