Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
• When connecting with VIDEO 1 input terminal of the television: Video CD player’s AV COMPU LINK setting: CD 2 VCR’s Remote Control Code: B • When connecting with VIDEO 2 input terminal of the television: Video CD player’s AV COMPU LINK setting: CD 3 VCR’s Remote Control Code: A TV Receiver Video CD player If you connect the Video CD player to a television and receiver via AV COMPU LINK as illustrated above, set the Video CD player’s AV COMPU LINK setting to CD1. Operation You can enjoy pictures and/or sound by just putting the Video CD player into play mode. You do not have to operate the TV and/or receiver including power switching. Preparation Set the POWER switch of each component to ON. 1. Insert a disc into the Video CD player. 2. Press 3(PLAY)/SELECT of the Video CD player. SELECT The following actions are performed automatically: • Turning on the power of each component. • Setting the source of the television to the external input which the Video CD player is connected to. • Setting the source of the receiver to the Video CD player. Notes for connection • Connect the AUDIO OUT jacks of the Video CD player to the audio input jacks of a receiver which show “DVD”. Otherwise, the system will not work correctly. • There may be no description about connections to a Video CD player in the instruction manual of a television or VCR. But a television or VCR with AV COMPU LINK terminals which show II can be connected to a Video CD player. Page 25 SPECIFICATIONS Main specifications XL-MV777GD/XL-MV757TN Model Video CD player Playback disc Super VCD Video CD Digital Audio CD Front panel XL-MV777GD Gold color XL-MV757TN Titanium Total harmonic distortion 0.01% (1 kHz) S/N ratio 90 dB Frequency 20 Hz – 20 kHz response Input terminal Microphone 5 mV (5.0 kW) Output Line output 2.0 Vrms (full scale) terminal Video output (composite) 1.0 Vp-p (75W) S video output Y: Illuminance 1.0 Vp-p (75W) C: Chrominance. burst 0.286 Vp-p (75W) Echoing Digital echoing Power AC 115-127/220-240 V 50/60 Hz requirements Selectable with the voltage selector Power 16 watts consumption In standby mode 6 watts Weight 5.3 kg (11.7 lbs) Dimensions 435 x 126.5 x 325.3 mm (W/H/D) 17-3/16 x 5 x12-13/16 inches Accessories AC power cord ........................................................................... 1 Audio video cable....................................................................... 1 Remote control unit (RM-SXLMV777U) ..................................... 1 Batteries (R6P(SUM-3)/AA(15F)) ......................................... 2 AC plug adaptor (except People's Republic of China) ............... 1 AV COMPU LINK cable ............................................................. 1 Page 26 EnglishEnglish TROUBLESHOOTING Troubleshooting What appears to be a malfunction may not always be so. Please go through the following list before requesting service. Symptom Possible cause Remedy Power does not come on. Power plug is disconnected from AC outlet. Firmly connect the plug to AC outlet. The POWER button is in the OFF position. Depress the POWER button. Remote control does not work. Batteries are exhausted. Replace the batteries with new ones. The tip of the remote control unit is not pointed at the receiving part of the player. Use the remote control correctly. No image is displayed on the monitor. The video cable is not connected. Firmly connect the cable. The TV is not set in video mode. Set the TV in video mode. An incompatible disc is loaded. Load a disc compatible with the player. Playback does not start. No disc is loaded. Load a disc. Disc is loaded upside down. Reload the disc with the label up. Speaker does not produce sound. Audio cable is not connected. Firmly connect the cable. Operation of the external amplifier is incorrect. Operate the amplifier correctly. Sound is distorted or noise is generated. Image is garbled. Disc is dirty. Wipe the disc surface with a soft cloth. Connection is wrong. Correctly connect cables. See page 2. Sound is intermittent. Image is garbled. Disk is dirty. Wipe the disc surface with a soft cloth. See page 1. Disc is scratched. Replace the disc with a new one. Disc is warped. Disc tray does not come out when 0(OPEN/CLOSE) button is pressed. Power plug is disconnected from the power outlet. Firmly insert the plug into the outlet. Operation is not possible. Microcomputer malfunctions due to lightning or static electricity. Turn the power off, then on again. The AV COMPU LINK system does not work correctly. The player's AV COMPU LINK setting is not correct. Make the setting correctly. The malfunction may be caused by a device other than the player. Check other devices connected to the player. Page 27 AC Power Line Instructions (not applicable for Europe, U.S.A., Canada, Australia and U.K.) RIGHT LEFT iAC IN RIGHT LEFT PAL NTSC MULTI VIDEO OUT SELECT AUDIO OUT FRONT AUDIO OUT SURROUND S-VIDEO OUT 115V-127V 220V-240V VOLTAGE SELECTOR AV COMPU LINK VIDEO OUT AUDIO OUT CENTER IMPORTANT BEFORE PL...
Эта инструкция также подходит к моделям:DVD-проигрыватели - XL-MV777GD (1009.04 kb)
DVD-проигрыватели - XL-MV757TN (1009.04 kb)
DVD-проигрыватели - XL-MV777GD (1009.04 kb)