Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
• You cannot watch a PAY-TV/Canal Plus programme while recording another PAY-TV/Canal Plus programme. • When you insert a non-standard commercially available tape, the remaining time may not be correct. • The remaining time is intended for rough measurement only. • About 30 seconds after the tape begins playback, the tape remaining time will be displayed. • You cannot record a DVD to a VCR tape. • To watch a TV programme during video recording, stop disc playback. Basic Operations Recording TV programmes Recording TV programmes using the timer You can preset up to six programmes at a time. Before you start… • Check that the DVD-VCR clock is set to the correct time. • Turn on the DVD-VCR and your TV. • Switch the input selector on your TV so that the signal from the player appears on the TV screen. •Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 9). • When using a decoder, turn it on. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. Z ?/1 SELECT VIDEO CLEAR TV/VIDEO TIMER INPUT SELECT x V/v/B/b ENTER 1 1 SUBTITLE/ Press TIMER. TIMER The timer programming menu appears. PR DATE START STOP SPEED V/P vV bB SET UP Recording TV programmes using the timer ENTER ENTER Set the date, start and stop times, programme position, tape speed and VPS/PDC function*: 1 Press b to select each item in turn. 2 Press V/v to set each item. To correct a setting, press B to return to that setting and reset. • To record the same programme every day or the same day every week, see “Daily/weekly recording” on page 48. • To use the VPS/PDC function*, set “V/P” to “On”. For details about the VPS/PDC function, see “Timer recording with VPS/PDC signals (SLVD910N only)” on page 48. • To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PR” position. * SLV-D910N only CLEAR SET UPvV bB PR DATE START STOP SPEED V/P INPUT SELECT ENTER Press ENTER to confirm the setting. To enter another setting, press V/v to select the next row and repeat step 2. Press CLEAR to cancel the setting. CLEAR Basic Operations ENTER Press ENTER to confirm all settings. Press ?/1 to turn off the DVD-VCR. The indicator appears in the display window and the VCR stands by for recording. To record from a decoder or other source, leave the connected equipment switched on. continued Recording TV programmes using the timer To stop recording To stop the DVD-VCR while recording, press SELECT VIDEO and then press x. Daily/weekly recording In step 2 above, press v to select the recording pattern. Each time you press v, the indication changes as shown below. Press V to change the indication in reverse order. today t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t W-SU...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SLV-D910N (1.45 mb)