Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
When using a cable box, make sure to leave it on. Notes • The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-30, or tapes recorded in the LP mode. • The display does not appear during still (pause) mode or slow-motion playback. • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. Basic Operations Recording TV programs using VCR Plus+ Just enter the program’s PlusCode listed in the TV program guide. The date, times and channel number of that program are set automatically. You can preset up to eight programs at a time. Before you start… • Check that the VCR clock is set to the correct time. • Turn on your TV and set it to the video channel. When using a cable box, turn it on. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. POWER TIMER CLEAR VCR Plus+ ONCE WEEKLY DAILY Number buttons TAPE SPEED Basic Operations VCR Plus+ Press VCR Plus+. VCR Plus+ PLUSCODE TAPE SPEED [–––––––– ] [ SP ] SET :[ 0–9 ] keys SP / EP :[TAPE SPEED ] 2 1 2 3 4 5 6 7 8 9 0 Press the number buttons to enter the program’s PlusCode. If you make a mistake, press TIMER CLEAR and re-enter the correct number. VCR Plus+ PLUSCODE [ 53292 ––– ] SP / EP [ SP ] CONFIRM CANCEL : : [ TIMER CLEAR ] [ ONCE ] , [ DAILY ] , [ WEEKLY ] continued Basic Operations 41 Recording programs using VCR Plus+ (continued) 3 TAPE SPEED Press TAPE SPEED to select SP or EP. VCR Plus+ PLUSCODE SP / EP [53292 ––– ] [EP] CONFIRM :[ ONCE ] , [ DAILY ] , [ WEEKLY ] CANCEL : [ TIMER CLEAR ] 4 ONCE Press ONCE, DAILY or WEEKLY: VCR Plus+ DAILY or To record Only once Press ONCE PLUSCODE [5 3292 – ] SP / EP [ EP ] 9 RECORDING TIME DATE START STOP CH /2 5 MON 8: 0 0 PM 11 :3 0 PM 52 EP –– WEEKLY or Everyday Monday to Friday Once a week DAILY WEEKLY CANCEL : [ TIMER CLEAR ] The date, start and stop times, channel number and tape speed appear on the TV screen. If the information is not correct, press TIMER CLEAR to cancel the setting. 5 To enter another setting, repeat steps 1 to 4. 6 •POWER POWERPOWER Press POWER to turn off the VCR. The TIMER indicator on the VCR lights up and the VCR stands by for recording. When using a cable box, leave it on. To stop recording To stop the VCR while recording, press pSTOP. Basic Operations To use the VCR after setting the timer To use the VCR before a timer recording begins, just press POWER. The “TIMER” indicator turns off and the VCR switches on. Remember to press POWER to reset the VCR in timer recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen. • Check the timer settings. • Watch another TV program. Tip • To cancel the procedure, press VCR Plus+ before pressing ONCE, DAILY or WEEKLY. Note • If the VCR beeps, this means that: – The PlusCode is incorrect. – ONCE, DAILY or WEEKLY was selected incorrectly. You cannot select DAILY or WEEKLY for a program that airs more than seven days ahead. Basic Operations Basic Operations Setting the timer manually If VCR Plus+ is not available in your area, follow the instructions below to set the timer to record programs. Before you start… • Check that the VCR clock is set to the correct time. • Turn on your TV and set it to the video channel. When using a cable box, turn it on. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. POWER MENU CURSOR EXECUTE 1 •MENU Press MENU and select TIMER SET/ CHECK. TIMER SET / CHECK 10/16 WED DATE START STOP CH –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – Basic Operations DATE – / –– 10 / 16 WED •CURSOR Set the date, start and stop times, channel TIMER SET / CHECK 10/16 WED START STOP CH number and tape speed: –:–– –:–– –– SP –:–– –:–– –– – –/–– –:–– –:–– –– – 1 Press CURSOR / to flash each item in –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – turn. –/–– –:–– –:–– –– – –/–– –:–– –:–– –– – 2 Press CURSOR >/. to set each item. –/–– –:–– –:–– –– – To correct a setting, press CURSOR ? to return to that setting and reset. To record the same program every day or the same day every week, press CURSOR . while the date is flashing. For details, see “Daily/ weekly recording” below. To record from a source connected to the LINE-1 IN or LINE-2 IN jacks, press INPUT SELECT to display “L1” or “L2” in the “CH” position. 3 •CURSOR Press CURSOR / to confirm the setting. The cursor (z) appears at the top of the line. To enter another setting, move the cursor to the next line and repeat step 2. 4 •EXECUTE Press EXECUTE. Basic Operations •POWER Press POWER to turn off the VCR. The TIMER indicator on the VCR lights up and the VCR stands by for recording. When using a cable box, leave it on. Daily/weekly recording In step 2 above, press CURSOR . to selec...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SLV-760HF (895.95 kb)
DVD-проигрыватели - SLV-760HFMJ (895.93 kb)
DVD-проигрыватели - SLV-761HF (895.93 kb)