Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
GUIDE CH TV CH 33– 5 Push [0–9] keys to set3 Press EXECUTE. program GUIDE CH Or, push [ EXECUTE ] to see VCR Plus+ CHANNEL LIST Program guide channel Cable box output channel Automatic clock setting To use the Auto Clock Set feature with this hookup, you need to manually select a channel that carries a time signal: 1 Tune the cable box to a channel that carries a time signal. 2 Select AUTO in the CLOCK SET menu to turn on the Auto Clock Set feature. 3 Turn off the VCR. It automatically sets the clock and adjusts for Daylight Saving Time by picking up the time signal. If you want to use the timer to record right away, or if the channels in your area do not carry time signals, set the clock manually. For details, see pages 27 and 28. Note To use the automatic clock setting feature, leave the cable box on. Getting Started Getting Started 15 Step 3: Hookups (continued) Hookup 3 Pages 16 to 18 No cable box, or cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels. What you can do with this hookup • Record any unscrambled channel by selecting the channel on the VCR What you can’t do • Record scrambled channels that require a cable box Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. IN OUT VHF/UHF IN OUT VHF/UHF Rear of TV A VHF B C UHF VHF UHF Cable box Connect this cable directly to your TV if you don't have a cable box. VCR Wall or or Getting Started RF UNIT CH3 CH4 RF UNIT CH3 CH4 Hookup 3: VCR setup 1 Set the RF UNIT switch to CH 3 or CH 4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 56. If you made A/V connections (pages 8 and 9), you can skip this step. 2 Turn on your cable box. 3 Set the clock. For details, see page 23. 1 Press MENU and select CLOCK SET. CLOCK SET • AUTO MANUAL SELECT :[ ] SET :[ EXECUTE ] QUIT :[MENU] 2 Select AUTO, then press EXECUTE. AUTO CLOCK SET FULL AUTO • YES NO 3 Set FULL AUTO to YES, then press EXECUTE. SET :[] END : [ EXECUTE ] 4 Preset the channels into the VCR. For details, see page 29. 1 Press MENU and select TUNER PRESET. 2 Set ANTENNA/CABLE to CABLE. TUNER PRESET CH1 ANTENNA / CABLE ANT • CABLE AUTO PRESET MANUAL SET • ADD ERASE AFT •ON OFF FINE TUNING SELECT :[ ] SET :[] 3 Select AUTO PRESET and press EXECUTE. CH1 TUNER PRESET ANTENNA / CABLE ANT • CABLE AUTO PRESET MANUAL SET • ADD ERASE AFT •ON OFF FINE TUNING Getting Started Please wait continued Getting Started 17 Step 3: Hookups (continued) Hookup 3: VCR Plus+ channel setup 1 Find the VCR Plus+ Channel Listing in your program guide. For details, see page 33. 2 If the channels in the program guide are different from the channels that you actually use on your TV, set the channels that are different as follows. For details, see page 34. 1 Press MENU and select SET VCR Plus+ MENU CHANNELS. TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] SET : [ EXECUTE ] 2 Enter the program guide channel, then the SET VCR Plus+ CHANNELS channel you use on your TV. GUIDE CH TV CH 25 – 15 Push [0–9] keys to set3 Press EXECUTE. program GUIDE CH Or, push [ EXECUTE ] to see VCR Plus+ CHANNEL LIST Program guide channel Your actual TV channel Automatic clock setting If you select AUTO in the CLOCK SET menu, then set FULL AUTO to YES, it automatically sets the clock the first time you turn off the VCR. After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. The VCR sets the clock by picking up a time signal provided by some TV channels. If you want to use the timer to record right away, or if the channels in your area do not carry time signals, set the clock manually. For details, see pages 27 and 28. Getting Started Pages 19 to 22Hookup 4 Pages 19 to 22Hookup 4 Cable box with only a few scrambled channels, using an A/B switch Recommended use By using an A/B switch (not supplied), this hookup allows you to record both scrambled and unscrambled channels conveniently. What you can do with this hookup • Record any unscrambled channel by selecting the channel directly on the VCR (the A/B switch is set to A) • Record any scrambled channel by selecting the channel on the cable box (the A/B switch is set to B) What you can’t do • Record one scrambled channel while watching another channel (the A/B switch is set to B) Splitter Match the type of connector on your TV: A, B, or C. A/B switch For connector A B types B and C, no UHF connection is required. IN OUT VHF/UHF IN OUT VCR or or Rear of TV VHF/UHF A VHF B UHF VHF C UHF Wall Cable box Getting Started continued Getting Started 19 Step 3: Hookups (continued) Hookup 4: VCR setup 1 Set the RF UNIT switch to CH 3 or CH 4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 56. ...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SLV-760HF (895.95 kb)
DVD-проигрыватели - SLV-760HFPX (895.93 kb)
DVD-проигрыватели - SLV-761HF (895.93 kb)